Order lines: 0

Ahlsell Products Technical insulationMineral wool

Mineral wool

Pipe Insulation

Loose Wool & Granulate

Marine insulation

Pipe suspensions

Accessories mineral wool

Do you need mineral wool for insulation? Ahlsell helps you find the right mineral wool for your project. We offer pipe bowls, industrial pipe bowls, lamellar mats, mesh mats, industrial mats, discs, and nail protectors, as well as accessories such as tape and nails. We have mineral wool for both heat insulation and sound insulation, practical and fireproof. Explore our wide range of mineral wool online or visit your nearest Ahlsell store.

Products (71)

Industrial Batts 80 Alu, Rockwool

Industrial Batts 80 Alu, Rockwool

Art. no.: 19061682

ROCKWOOL Industribatts 80 is used for insulating ventilation ducts, tanks, containers, etc., and is a sturdy and rigid sheet of non-combustible, moisture- and water-repellent stone wool. The board has good insulation properties, especially at high temperatures, as well as good dimensional stability and thus also good load-bearing capacity/compressive strength on the surface. Maximum service temperature 250°C. Thermal conductivity (λ-value) 0.042 at 50°C.

Fire protection Conlit 150 P (without fabric), Rockwool

Fire protection Conlit 150 P (without fabric), Rockwool

Art. no.: 447221020

Conlit 150 P is made of water-repellent ROCKWOOL mineral wool. It is a very stiff and hard product with exceptional fire protection properties.
Conlit 150 P are used as fire protection of structural steel structures from R30-R120. is used in conjunction with Conlit glue or pins.

Pipe Section Thermo PS Pro ALU Insulation thickness 100 mm, Knauf

Knauf Insulation

Pipe Section Thermo PS Pro ALU Insulation thickness 100 mm, Knauf

Art. no.: 470310076

Thermo-teK PS Pro ALU is a circular pipe bowl, with non-combustible mineral wool of stone wool.
Thermo-teK PS Pro ALU is made with formaldehyde-free ECOSE® Technology binder and is coated with fiberglass-reinforced aluminum foil. It has been worn on one side for easier installation and equipped with long-term self-adhesive tape.
Thermoelectronics PS Pro ALU is rated for up to EI120 min for wall / ceiling inspirations according to EN 13501-2.

Industrial roller RL 220, Knauf

Knauf Insulation

Industrial roller RL 220, Knauf

Art. no.: 19059652

Power-teK RL220 is a light mineral wool mat that is designed for installation on e.g. accumulator tanks and other forms of cisterns. The mat is very flexible and easy to install and allows for insulation thicknesses of up to 300mm per layer. Which gives fewer layers of insulation with possible time savings as a result. The carpet is delivered in compressed rolls, which makes transport and handling of the material at the assembly site efficient.
Knauf mineral wool products are manufactured with ECOSE® Technology, a binder that has no added formaldehyde and is based on renewable bio-based ingredients instead of petroleum-based chemicals. The technology makes the products extra pleasant to handle which makes them extra installation friendly (they are soft, but flexible and give a pleasant feeling). All technical characteristics maintain a competitive level or higher. Handling, installation and fastening correspond to current market standards. ECOSE® Technology, binder without added formaldehyde provides an odorless, pleasant mineral wool with excellent fiber elasticity for a perfect fit on all types of pipes, ducts and containers. Thermal conductivity (λ value) 0.042 at 50°C.

Pipe Section 800 alu-armored Insulation thickness 50mm, Rockwool

Pipe Section 800 alu-armored Insulation thickness 50mm, Rockwool

Art. no.: 47025048

Pipe section 800 is a non-deformable pipe shell made of moisture- and water-repellent Rockwool . It has a good pressure strength and non-deformability are good which serves as a good underlayer cladding.
The pipe section is enveloped with reinforced aluminium foil that has an overlap with self-adhesive tape. The area of use for a pipe section is primarily heat- and condensation insulation both in industry and in the plumbing profession.
It has an effective insulating capacity and also functions at high temperatures; highest workable temperature is 650º and for an outer layer 80º. The product is spiral wound with galvanised steel wire. Meets water, ventilation and sanitation-AMA standards for A class. Type approval TG 0509/02.

Marinisolering SeaRox SL 620 GW-A, Rockwool

Rockwool SeaRox

Marinisolering SeaRox SL 620 GW-A, Rockwool

Art. no.: 19063678

Pipe Section Universal Insulation thickness 40 mm with tape, Rockwool

Pipe Section Universal Insulation thickness 40 mm with tape, Rockwool

Art. no.: 47014042

Universal pipe section is manufactured by Rockwool Stenull Universal pipe section with tape is a bendable and flexible pipe section which means a simple, quick mounting. The pipe section is clad with reinforced aluminium foil and is suitable for most installations involving hot and cold pipes Highest temperature for use is 250°C and for outer layer 80°C. The product is spiral wound with galvanised steel wire. Approved for pipe insulation, outer layer class 1. Type approval 0509/02 from SITAC.

Welding nail Type CDF

Welding nail Type CDF

Art. no.: 45591062

Copper-insulated welding spike on an insulated base, with a diameter of 2.7mm.

Marine insulation SeaRox SL 620, Rockwool

Rockwool SeaRox

Marine insulation SeaRox SL 620, Rockwool

Art. no.: 47415050

Formerly Marine Firebatts 100
Batting for fireproof insulation in approved A constructions.

Firebatts ProRox SL960 SC, Rockwool

Rockwool ProRox

Firebatts ProRox SL960 SC, Rockwool

Art. no.: 472630502

Formerly Brandbatts 100
Rigid sheet of fireproof rock wool. Nominal density 100 kg/m3. Thermal insulation of high-temperature tanks, ovens, and containers.
The product is also used for soundproofing and fireproofing of fire doors and fire chambers. Maximum recommended
operating temperature 650°C.

Aluminium tape, wire reinforced a-collection

Aluminium tape, wire reinforced a-collection

Art. no.: 500726

Wire-reinforced aluminum tape with acrylic adhesive that quickly attaches to most surfaces. Used as a vapor and moisture barrier when sealing mineral wool and foils.

Aluminium tape, wire reinforced a-collection

Industrial roller ProRox MA920 ALUSC, Rockwool

Rockwool ProRox

Industrial roller ProRox MA920 ALUSC, Rockwool

Art. no.: 472581000

Previously Industrirulle T
Roll of light, fireproof rock wool. One side is coated with armoured, PE-reinforced aluminium foil. Robust product that adapts itself to curved surfaces. Easy to work with, even outdoors. Nominal density 33 kg/m3. Heat insulation of storage tanks, large tanks, and cistern walls.
Maximum recommended operating temperature 250°C.

Lamell insulation with reinforced Alu-foil, Austroflex

Lamell insulation with reinforced Alu-foil, Austroflex

Art. no.: 44041102

Glass wool with transverse fibres in lamellas attached to glass-fibre reinforced aluminium foil. Area of application: Heat and condensation insulation of pipes, ventilation channels etc.
Max. temperature: 250° C, foil 80°. Fire class: Surface class 1.

Pipe Section Thermo PS Pro ALU Insulation thickness 60 mm, Knauf

Knauf Insulation

Pipe Section Thermo PS Pro ALU Insulation thickness 60 mm, Knauf

Art. no.: 47036022

Thermo-teK PS Pro ALU is a circular tube bowl, with non-combustible mineral wool of stone wool.
Thermo-teK PS Pro ALU is made with formaldehyde-free ECOSE® Technology binder and is coated with fiberglass-reinforced aluminum foil. It has been worn on one side for easier installation and equipped with long-term self-adhesive tape.
Thermoelectronics PS Pro ALU is rated for up to EI120 min for wall / ceiling inspirations according to EN 13501-2.

Fire Sheet Conlit FireBoard Black, Rockwool

Fire Sheet Conlit FireBoard Black, Rockwool

Art. no.: 47221632

CONLIT Fire Board is an assortment of fire sheets designed for fire classes EI30-EI120. CONLIT fire technical characteristics, dimensions and thickness are not degraded during their lifetime.
CONLIT Fire Board is a high quality product with many advantages that make installation easier and faster. The panels are easily adapted to the ventilation duct and the black tape contributes to a neat and easy installation.
CONLIT Fire Board is made of non-combustible, moisture and water-repellent ROCKWOOL stone wool. The front has a surface layer of black aluminum foil. The solution also contributes to energy efficiency and noise reduction.

Loose Wool Power-teK LW STD, Knauf

Knauf Insulation

Loose Wool Power-teK LW STD, Knauf

Art. no.: 19061697

Power-teK LW STD Loose Wool.
Max service temperature 660°C. Thermal conductivity (λ-value) 0.041 at 50°C.

Fire Mat CONLIT FireMat Black, Rockwool

Fire Mat CONLIT FireMat Black, Rockwool

Art. no.: 47221609

CONLIT Fire Mat is made of non-combustible, moisture and water-repellent ROCKWOOL stone wool. The front has a surface layer of black aluminum foil. The solution also contributes to energy efficiency and noise reduction.

Marinisolering SeaRox WM 620, Rockwool

Rockwool SeaRox

Marinisolering SeaRox WM 620, Rockwool

Art. no.: 47433045

Pipe Section Universal Insulation Thickness 20 mm with tape, Rockwool

Pipe Section Universal Insulation Thickness 20 mm with tape, Rockwool

Art. no.: 47012015

Universal pipe shell is manufactured by Rockwool Stenull Universal pipe shell with tape is a bendable and flexible pipe shell which means a simple, quick mounting. The pipe shell is clad with reinforced aluminium foil and is suitable for most installations involving hot and cold pipes Highest temperature for use is 250°C and for outer layer 80°C. The product is spiral wound with galvanised steel wire. Approved for pipe insulation, outer layer class 1. Type approval 0509/02 from SITAC.

Comfort Heating Mat, Rockwool

Comfort Heating Mat, Rockwool

Art. no.: 47118050

Heat insulation of pipelines, ventilation ducts,expansion vessels, containers etc. rockwool mat with galvanised wire mesh and with non-woven fabric between the mesh and the wool.
Package: Plastic foil/pall. Max. temperature: Wool side 250^oC. Surface layer 100°C. Approved for external fire insulation of ducts in class EI 15, El 30.(TG 0108/02)

Fire Mat WM 908/910 GGB black 900mm, Knauf

Knauf Insulation

Fire Mat WM 908/910 GGB black 900mm, Knauf

Art. no.: 19058097

Mineral wool mesh mats with black tear-resistant aluminum foil on one side. Knauf Insulation Fire-teK® DuctProtect 30-90 C SYSTEM with mesh mat Fire-teK® WM 908 GGB / Fire-teK® WM 910 GGB has been developed for use on ventilation ducts and provides passive fire protection for circular ventilation ducts. In addition to providing relevant protection in the event of fire, they also have good thermal and acoustic insulation properties. Maximum diameter of the channel is 1000 mm.
Depending on the fire class, the system requires an insulation thickness of 40, 80 or 100 mm. Thermal conductivity (λ value) 0.040 at 50°C.

Alu-Heating Mat, Rockwool

Alu-Heating Mat, Rockwool

Art. no.: 47108050

Heat insulation of pipes, boilers, containers etc. rockwool mat with galvanised wire mesh and aluminium foil between the mesh and the wool.
Package: Plastic foil/pall.
Max. temperature: Wool side 250^oC. Surface layer 80°C. Approved for external fire insulation of ducts in class EI 15, El 30. (TG 0108/02).

Fire Mat CONLIT FireMat BLACK, Rockwool

Fire Mat CONLIT FireMat BLACK, Rockwool

Art. no.: 19059767

CONLIT Fire Mat is made of non-combustible, moisture and water-repellent ROCKWOOL stone wool. The front has a surface layer of black aluminum foil. The solution also contributes to energy efficiency and noise reduction.

Lamell insulation with reinforced Alu-foil, KNAUF

Knauf Insulation

Lamell insulation with reinforced Alu-foil, KNAUF

Art. no.: 19053157

Pipe Section Universal Insulation thickness 60 mm with tape, Rockwool

Pipe Section Universal Insulation thickness 60 mm with tape, Rockwool

Art. no.: 47016022

Universal pipe Section is manufactured by Rockwool Stenull Universal pipe Section with tape is a bendable and flexible pipe Section which means a simple, quick mounting. The pipe Section is lined with reinforced aluminium foil and is suitable for most installations involving hot and cold pipes Highest temperature for use is 250°C and for outer layer 80°C. The product is spiral wound with galvanised steel wire. Approved for pipe insulation, outer layer class 1. Type approval 0509/02 from SITAC.

Pipe Section 800 alu-armored Insulation thickness 30mm, Rockwool

Pipe Section 800 alu-armored Insulation thickness 30mm, Rockwool

Art. no.: 47023015

Pipe section 800 is a non-deformable pipe shell made of moisture- and water-repellent Rockwool . It has a good pressure strength and non-deformability are good which serves as a good underlayer cladding.
The pipe section is enveloped with reinforced aluminium foil that has an overlap with self-adhering tape. The area of use for a pipe section is primarily heat- and condensation insulation both in industry and in the plumbing profession.
It has an effective insulating capacity and also functions at high temperatures; highest workable temperature is 650º and for an outer layer 80º. The product is spiral wound with galvanised steel wire. Meets water, ventilation and sanitation-AMA standards for A class. Type approval TG 0509/02.

Pipe section 800 alu-armored Insulation thickness 80mm, Rockwool

Pipe section 800 alu-armored Insulation thickness 80mm, Rockwool

Art. no.: 47028048

Pipe section 800 is a non-deformable pipe section made of moisture- and water-repellent Rockwool . It has a good pressure strength and non-deformability are good which serves as a good underlayer cladding.
The pipe section is enveloped with reinforced aluminium foil that has an overlap with self-adhering tape. The area of use for a pipe section is primarily heat- and condensation insulation both in industry and in the plumbing profession.
It has an effective insulating capacity and also functions at high temperatures; highest workable temperature is 650º and for an outer layer 80º. The product is spiral wound with galvanised steel wire. Meets water, ventilation and sanitation-AMA standards for A class. Type approval TG 0509/02.

Duct Batts 65, Rockwool

Duct Batts 65, Rockwool

Art. no.: 471165100

Made of Rock wool. Heat and sound insulation of rectangular ventilation ducts. Also suitable for sound and heat insulation of walls and roofs inside. Rock wool sheet with staple fibre on one side.
Max. temperature: Wool side 250^oC.

Industrial wool ProRox LF970 SC, Rockwool

Rockwool ProRox

Industrial wool ProRox LF970 SC, Rockwool

Art. no.: 47267000

Previously Industriull
Loose insulation, made of non-impregnated, fireproof rock wool. Product supplied in the form of a mat, that can easily be disassembled
into loose pieces. Supplied with or without oil. Typical density, packed: 120 kg/m3. The wool can easily be compressed to higher densities.
Insulation of ovens or similar places where Industriull can be packed between two boundary surfaces. Maximum recommended
operating temperature 680°C.

Adhesive tape Alu, smooth, a-collection

Adhesive tape Alu, smooth, a-collection

Art. no.: 44039950

Aluminium tape with good adhesion properties, specially designed for use in ventilation, insulation, and construction. Available in 25m rolls and comes in both 50mm and 75mm widths.

Adhesive tape Alu, smooth, a-collection

Ventmatta Thermo-teK RL Eco ALP, KNAUF

Knauf Insulation

Ventmatta Thermo-teK RL Eco ALP, KNAUF

Art. no.: 19062828

Netmat ProRox WM 967 ALUSC, Rockwool

Rockwool ProRox

Netmat ProRox WM 967 ALUSC, Rockwool

Art. no.: 47255050

Fireproof rock wool mat, equipped on one side with a 25 mm net of galvanised wire and glass wire-reinforced aluminium
foil between the wool and the net. Nominal density 100 kg/m3.
Also available with stainless wire net and AS quality by request. Heat insulation of
pipes, boilers, ovens, smoke ducts, expansion vessels, containers, etc. Maximum recommended operating temperature 640°C.
The wire net may not be exposed to higher temperatures than 300°C. The aluminium foil may not be exposed to higher temperatures than 80°C.

Aluminum Tape Conlit Black, Rockwool

Aluminum Tape Conlit Black, Rockwool

Art. no.: 47221650

Aluminum Tape Smooth, Isover

Aluminum Tape Smooth, Isover

Art. no.: 19051110

Adhesive tape Alu/polyester Okatherm, a-collection

Adhesive tape Alu/polyester Okatherm, a-collection

Art. no.: 19060008

ALU / polyester tape.

Netmat ProRox WM 967SC, Rockwool

Rockwool ProRox

Netmat ProRox WM 967SC, Rockwool

Art. no.: 472540500

Previously Nätmatta 100
Fireproof rock wool mat, equipped on one side with a 25 mm net of galvanised wire. Nominal density 100 kg/m3. Also available with stainless wire net and AS quality by request. Heat insulation of pipes, boilers, ovens, smoke ducts, expansion vessels, containers, etc.
Maximum recommended operating temperature 660°C. The wire net may not be exposed to higher temperatures than 300°C.

Comfort Net Mat ProRox WM 967 PFSC, Rockwool

Rockwool ProRox

Comfort Net Mat ProRox WM 967 PFSC, Rockwool

Art. no.: 472570300

Previously Komfortnätmatta 100
Fireproof rock wool mat, equipped on one side with a 25 mm net of galvanised wire and a comfortable surface layer (non-woven) between the wool and the net. Nominal density 100 kg/m3. Heat insulation of pipes, boilers, ovens, smoke ducts, expansion vessels, containers, etc.
Maximum recommended operating temperature 660°C. The wire net may not be exposed to higher temperatures than 300°C. The comfortable surface layer may not be exposed to higher temperatures than 100°C.

Coil wire galvanized, Isolex

Coil wire galvanized, Isolex

Art. no.: 45501030X

Insulation wire on plastic coil.

Pipe Section Universal Insulation thickness 30 mm with tape, Rockwool

Pipe Section Universal Insulation thickness 30 mm with tape, Rockwool

Art. no.: 47013015

Universal pipe shell is manufactured by Rockwool Stenull Universal pipe shell with tape is a bendable and flexible pipe shell which means a simple, quick mounting. The pipe shell is clad with reinforced aluminium foil and is suitable for most installations involving hot and cold pipes Highest temperature for use is 250°C and for outer layer 80°C. The product is spiral wound with galvanised steel wire. Approved for pipe insulation, outer layer class 1. Type approval 0509/02 from SITAC.

Pipe Section Universal Insulation thickness 50 mm with tape, Rockwool

Pipe Section Universal Insulation thickness 50 mm with tape, Rockwool

Art. no.: 47015022

Universal pipe section is manufactured by Rockwool Stenull Universal pipe section with tape is a bendable and flexible pipe section which means a simple, quick mounting. The pipe section is lined with reinforced aluminium foil and is suitable for most installations involving hot and cold pipes Highest temperature for use is 250°C and for outer layer 80°C. The product is spiral wound with galvanised steel wire. Approved for pipe insulation, outer layer class 1. Type approval 0509/02 from SITAC.

Pipe Section 800 alu-armored Insulaton thickness 20mm, Rockwool

Pipe Section 800 alu-armored Insulaton thickness 20mm, Rockwool

Art. no.: 47022015

Pipe section 800 is a non-deformable pipe section made of moisture- and water-repellent Rockwool . It has a good pressure strength and non-deformability are good which serves as a good underlayer cladding.
The pipe section is enveloped with reinforced aluminium foil that has an overlap with self-adhesive tape. The area of use for a pipe section is primarily heat- and condensation insulation both in industry and in the plumbing profession.
It has an effective insulating capacity and also functions at high temperatures; highest workable temperature is 650º and for an outer layer 80º. The product is spiral wound with galvanised steel wire. Meets water, ventilation and sanitation-AMA standards for A class. Type approval TG 0509/02.

Pipe Section 800 alu-armored Insulation thickness 40mm, Rockwool

Pipe Section 800 alu-armored Insulation thickness 40mm, Rockwool

Art. no.: 47024015

Pipe section 800 is a non-deformable pipe section made of moisture- and water-repellent Rockwool . It has a good pressure strength and non-deformability are good which serves as a good underlayer cladding.
The pipe section is enveloped with reinforced aluminium foil that has an overlap with self-adhering tape. The area of use for a pipe section is primarily heat- and condensation insulation both in industry and in the plumbing profession.
It has an effective insulating capacity and also functions at high temperatures; highest workable temperature is 650º and for an outer layer 80º. The product is spiral wound with galvanised steel wire. Meets water, ventilation and sanitation-AMA standards for A class. Type approval TG 0509/02.

Pipe Section 800 alu-armored Insulation thickness 60mm, Rockwool

Pipe Section 800 alu-armored Insulation thickness 60mm, Rockwool

Art. no.: 47026022

Pipe section 800 is a non-deformable pipe section made of moisture- and water-repellent Rockwool . It has a good pressure strength and non-deformability are good which serves as a good underlayer cladding.
The pipe section is enveloped with reinforced aluminium foil that has an overlap with self-adhering tape. The area of use for a pipe section is primarily heat- and condensation insulation both in industry and in the plumbing profession.
It has an effective insulating capacity and also functions at high temperatures; highest workable temperature is 650º and for an outer layer 80º. The product is spiral wound with galvanised steel wire. Meets water, ventilation and sanitation-AMA standards for A class. Type approval TG 0509/02.

Adhesive Nail Oka Fix

Adhesive Nail Oka Fix

Art. no.: 4511063

Washer included for attaching the insulation.

AGM-nail Insulated CH, BM Svets

AGM-nail Insulated CH, BM Svets

Art. no.: 45601029

To be used when installing insulation with web mat or foil in ventilation ducts. pipelines or steel structures. The tray insulation reduces the risk of a poor solder and burn marks on the foil.

Nail guard NSC - for adhesive nails

Nail guard NSC - for adhesive nails

Art. no.: 45600012

Nail guard for 2.7 mm nails.

Ventilation Sheet Cleantec G35 Bulk Pack, Isover

Ventilation Sheet Cleantec G35 Bulk Pack, Isover

Art. no.: 44133935

Glass wool with black fabric on one side. Thermal insulation and sound attenuation inside ventilation ducts and units.

Pipe Section Thermo PS Pro ALU Insulation thickness 20 mm, Knauf

Knauf Insulation

Pipe Section Thermo PS Pro ALU Insulation thickness 20 mm, Knauf

Art. no.: 47032015

Thermo-teK PS Pro ALU is a circular tube bowl, with non-combustible mineral wool of stone wool.
Thermo-teK PS Pro ALU is made with formaldehyde-free ECOSE® Technology binder and is coated with fiberglass-reinforced aluminum foil. It has been worn on one side for easier installation and equipped with long-term self-adhesive tape.
Thermoelectronics PS Pro ALU is rated for up to EI120 min for wall / ceiling inspirations according to EN 13501-2.

Pipe Section Thermo PS Pro ALU Insulation thickness 30 mm, Knauf

Knauf Insulation

Pipe Section Thermo PS Pro ALU Insulation thickness 30 mm, Knauf

Art. no.: 47033015

Thermo-teK PS Pro ALU is a circular tube bowl, with non-combustible mineral wool of stone wool.
Thermo-teK PS Pro ALU is made with formaldehyde-free ECOSE® Technology binder and is coated with fiberglass-reinforced aluminum foil. It has been worn on one side for easier installation and equipped with long-term self-adhesive tape.
Thermoelectronics PS Pro ALU is rated for up to EI120 min for wall / ceiling inspirations according to EN 13501-2.

Pipe Section Thermo PS Pro ALU Insulation thickness 40 mm, Knauf

Knauf Insulation

Pipe Section Thermo PS Pro ALU Insulation thickness 40 mm, Knauf

Art. no.: 47034015

Thermo-teK PS Pro ALU is a circular tube bowl, with non-combustible mineral wool of stone wool.
Thermo-teK PS Pro ALU is made with formaldehyde-free ECOSE® Technology binder and is coated with fiberglass-reinforced aluminum foil. It has been worn on one side for easier installation and equipped with long-term self-adhesive tape.
Thermoelectronics PS Pro ALU is rated for up to EI120 min for wall / ceiling inspirations according to EN 13501-2.

Pipe Section Thermo PS Pro ALU Insulation thickness 50 mm, Knauf

Knauf Insulation

Pipe Section Thermo PS Pro ALU Insulation thickness 50 mm, Knauf

Art. no.: 19058406

Thermo-teK PS Pro ALU is a circular tube bowl, with non-combustible mineral wool of stone wool.
Thermo-teK PS Pro ALU is made with formaldehyde-free ECOSE® Technology binder and is coated with fiberglass-reinforced aluminum foil. It has been worn on one side for easier installation and equipped with long-term self-adhesive tape.
Thermoelectronics PS Pro ALU is rated for up to EI120 min for wall / ceiling inspirations according to EN 13501-2.

Pipe Section Thermo PS Pro ALU Insulation thickness 80 mm, Knauf

Knauf Insulation

Pipe Section Thermo PS Pro ALU Insulation thickness 80 mm, Knauf

Art. no.: 47038028

Thermo-teK PS Pro ALU is a circular tube bowl, with non-combustible mineral wool of stone wool.
Thermo-teK PS Pro ALU is made with formaldehyde-free ECOSE® Technology binder and is coated with fiberglass-reinforced aluminum foil. It has been worn on one side for easier installation and equipped with long-term self-adhesive tape.
Thermoelectronics PS Pro ALU is rated for up to EI120 min for wall / ceiling inspirations according to EN 13501-2.

Showing 52 of 71