Order lines: 0

Ahlsell ProductsTechnical insulation

Technical insulation

Cellular rubber

Surface cladding system

Technical Fabrics

Special products

Looking for technical insulation? We have products that will suit your needs. Our range allows you to isolate correctly. Ahlsell offers a quality range of insulation materials, including mineral wool, cellular rubber, surface coverings, technical fabrics, fire sealing, and sheet metal. By finding the right technical insulation, you can deliver a high-quality result to your customer. Check out our full range of technical insulation on our website or visit your local Ahlsell store.

Products (250)

Fire protection Conlit 150 P (without fabric), Rockwool

Fire protection Conlit 150 P (without fabric), Rockwool

Art. no.: 447221020

Conlit 150 P is made of water-repellent ROCKWOOL mineral wool. It is a very stiff and hard product with exceptional fire protection properties.
Conlit 150 P are used as fire protection of structural steel structures from R30-R120. is used in conjunction with Conlit glue or pins.

Cell rubber insulation AF/Armaflex, plates in rollers, pre-glued

Cell rubber insulation AF/Armaflex, plates in rollers, pre-glued

Art. no.: 43511408

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Fire class B L-s3,d0 (outer layer class II). Tg 3176/83: Pipe bushings
This typeis coated with glue and is applied directly to the surface without any extra glue. The surface should be cleaned with a cleaning agent meant especially for glue to achieve the best installation results.

Fire protection kit fs-flex

Fire protection kit fs-flex

Art. no.: 1480433

Kit for sealing medium-sized openings (5 dm²) for cables, ladders, pipes and ventilation ducts. The kit contains 2 tubes of FSS-3000, aluminium silicate wool for insulation. 1 putty knife and instructions for use. Fire-classification 60 is achieved if an insulation material is installed to a filled depth of 100 mm and thereafter a sealing compound is applied to a thickness of 12 mm.

Pipe Section Thermo PS Pro ALU Insulation thickness 30 mm, Knauf

Knauf Insulation

Pipe Section Thermo PS Pro ALU Insulation thickness 30 mm, Knauf

Art. no.: 47033035

Thermo-teK PS Pro ALU is a circular tube bowl, with non-combustible mineral wool of stone wool.
Thermo-teK PS Pro ALU is made with formaldehyde-free ECOSE® Technology binder and is coated with fiberglass-reinforced aluminum foil. It has been worn on one side for easier installation and equipped with long-term self-adhesive tape.
Thermoelectronics PS Pro ALU is rated for up to EI120 min for wall / ceiling inspirations according to EN 13501-2.

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 13mm (tolerance ± 1.5 mm)

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 13mm (tolerance ± 1.5 mm)

Art. no.: 43204012

Insulation for pipes and tanks with high temperatures as well as with variable temperatures. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer), uv-resistant, oil-resistant Temperature range -50°C - +150 °C. Fire class DL-s3,d0.

Fire Silicon Sikasil 670

Fire Silicon Sikasil 670

Art. no.: 462068

1-component neutral-hardening, fire retardant silicone for fire protection, suitable for indoor / outdoor use. Flameproof. Primer-free adhesion on many different surfaces. Excellent ageing resistance to UV . Odourless. Solvent-free.

Discs, Pre-Glued, Armasound RD 122

Discs, Pre-Glued, Armasound RD 122

Art. no.: 49920019

Open cell plates of elastomeric foam with excellent sound absorption. Effective sound absorption even in thin layers. Self-adhesive

Fire tape Pipe choke Protega Novastripe

Fire tape Pipe choke Protega Novastripe

Art. no.: 690242

Novastripe is a strip made of the expanding sealing compound Novaflex. The sealing strip expands when it is exposed to high temperatures in the event of a fire and effectively seals any openings that may occur after the melting plastic pipe in the bushing. Able to seal plastic pipes up to Ø 125 mm. Delivered on a roll, 10 meters per roll. Fire technical class EI30 - EI120, see installation instructions what is required to meet different fire classes.

Fire sealant fss-3000

Fire sealant fss-3000

Art. no.: 1480425

Silicon adhesive
Silicone-based sealant in 310 ml cartridge which is applied using a cartridge gun. Intended for fire-classed joints and seals. Fire class A 60.

Fire sealant fss-3000

Firestop Sealant Graphite Nullifire FS709

Firestop Sealant Graphite Nullifire FS709

Art. no.: 706186

Expanding graphite sealant that expands when exposed to fire, thereby protecting penetrations such as cables, cable bundles, cable trays, plastic and metal pipes. Seals tightly in openings and penetrations in the fire cell's walls and floors, providing up to 4 hours of fire resistance. This product protects plastic pipe penetrations in the event of a fire and eliminates the need for pipe closures or pipe clamps. FS709 is suitable for penetrations with pipes of the following types up to 125 mm: PVC pipes, ABS pipes, and HDPE pipes with Armaflex and glass wool insulation. It can also be used with metal pipes, cables, and cable bundles, as well as with telecommunications cables, cable trays, and cable ladders.

Marinisolering SeaRox SL 620 GW-A, Rockwool

Rockwool SeaRox

Marinisolering SeaRox SL 620 GW-A, Rockwool

Art. no.: 19063678

Cell Rubber Insulation AF/Armaflex AF-6, with increasing insulation thickness (tolerance ± 3.0 mm)

Cell Rubber Insulation AF/Armaflex AF-6, with increasing insulation thickness (tolerance ± 3.0 mm)

Art. no.: 43906012

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Insulation Tape AF/Armaflex

Insulation Tape AF/Armaflex

Art. no.: 43600140

Self adhesive insulation tape made of AF rubber cell specially intended for rubber cell insulation AF type, such as thermic insulation.

Industrial wool ProRox LF970 SC, Rockwool

Rockwool ProRox

Industrial wool ProRox LF970 SC, Rockwool

Art. no.: 47267000

Previously Industriull
Loose insulation, made of non-impregnated, fireproof rock wool. Product supplied in the form of a mat, that can easily be disassembled
into loose pieces. Supplied with or without oil. Typical density, packed: 120 kg/m3. The wool can easily be compressed to higher densities.
Insulation of ovens or similar places where Industriull can be packed between two boundary surfaces. Maximum recommended
operating temperature 680°C.

Pipe Section Universal Insulation thickness 40 mm with tape, Rockwool

Pipe Section Universal Insulation thickness 40 mm with tape, Rockwool

Art. no.: 47014015

Universal pipe section is manufactured by Rockwool Stenull Universal pipe section with tape is a bendable and flexible pipe section which means a simple, quick mounting. The pipe section is clad with reinforced aluminium foil and is suitable for most installations involving hot and cold pipes Highest temperature for use is 250°C and for outer layer 80°C. The product is spiral wound with galvanised steel wire. Approved for pipe insulation, outer layer class 1. Type approval 0509/02 from SITAC.

Technical fabric Steffca WG430-1SIGB

Technical fabric Steffca WG430-1SIGB

Art. no.: 41917011

Silver/grey silicone fabric covered on one side. Constant temperature 250ºC and/or the max temperature 550ºC.

Cellgummiisolerng ArmaFlex NH Smart, slang 19mm (tolerans±2,5 mm)

Cellgummiisolerng ArmaFlex NH Smart, slang 19mm (tolerans±2,5 mm)

Art. no.: 19058260

Insulation/protection for pipes, tanks, and ventilation ducts in the marina sector, shipbuilding, computer rooms, or other areas where halogen-free materials are required in installations. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer) without halogens, chlorides, or bromides. Temperature range -50°C - +110 °C. Fire class DL-s3,d0

Insulation Knife for Cellular Rubber, a-collection

Insulation Knife for Cellular Rubber, a-collection

Art. no.: 43600176

With fillet-sharp edge and rigid stainless steel blade for cutting cellular rubber. Plastic handle in polypropylene.

Marinisolering SeaRox WM 620, Rockwool

Rockwool SeaRox

Marinisolering SeaRox WM 620, Rockwool

Art. no.: 47433045

Insulation Knife for Mineral Wool, a-collection

Insulation Knife for Mineral Wool, a-collection

Art. no.: 45503231

With toothed, rigid blade made of stainless steel for cutting mineral wool. Plastic handle in polypropylene.

Fire Sheet Conlit FireBoard Black, Rockwool

Fire Sheet Conlit FireBoard Black, Rockwool

Art. no.: 47221632

CONLIT Fire Board is an assortment of fire sheets designed for fire classes EI30-EI120. CONLIT fire technical characteristics, dimensions and thickness are not degraded during their lifetime.
CONLIT Fire Board is a high quality product with many advantages that make installation easier and faster. The panels are easily adapted to the ventilation duct and the black tape contributes to a neat and easy installation.
CONLIT Fire Board is made of non-combustible, moisture and water-repellent ROCKWOOL stone wool. The front has a surface layer of black aluminum foil. The solution also contributes to energy efficiency and noise reduction.

Pipe Section 800 alu-armored Insulation thickness 50mm, Rockwool

Pipe Section 800 alu-armored Insulation thickness 50mm, Rockwool

Art. no.: 47025048

Pipe section 800 is a non-deformable pipe shell made of moisture- and water-repellent Rockwool . It has a good pressure strength and non-deformability are good which serves as a good underlayer cladding.
The pipe section is enveloped with reinforced aluminium foil that has an overlap with self-adhesive tape. The area of use for a pipe section is primarily heat- and condensation insulation both in industry and in the plumbing profession.
It has an effective insulating capacity and also functions at high temperatures; highest workable temperature is 650º and for an outer layer 80º. The product is spiral wound with galvanised steel wire. Meets water, ventilation and sanitation-AMA standards for A class. Type approval TG 0509/02.

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Cell Rubber Insulation AF/Armaflex AF-2, Hose 13mm (tolerance ± 1.0mm)

Art. no.: 43802125

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour passage resistance µ>10000. High heat insulation capacity lambda. < 0.033 W/mK guaranteed technical quality on the basis of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Aluminium tape, wire reinforced a-collection

Aluminium tape, wire reinforced a-collection

Art. no.: 500726

Wire-reinforced aluminum tape with acrylic adhesive that quickly attaches to most surfaces. Used as a vapor and moisture barrier when sealing mineral wool and foils.

Aluminium tape, wire reinforced a-collection

Aluminium elbow Okatherm 90° Insulationthickness 40mm

Aluminium elbow Okatherm 90° Insulationthickness 40mm

Art. no.: 41403107

Outer cladding. Stucco-enhanced.

Peeling Knife, a-collection

Peeling Knife, a-collection

Art. no.: 45503101

Knife, suitable for cutting cellular rubber, e.g. for round sticks, valves, or circular bits. Blade of stainless steel, with two-component plastic handle.

Fire Mat WM 908/910 GGB black 900mm, Knauf

Knauf Insulation

Fire Mat WM 908/910 GGB black 900mm, Knauf

Art. no.: 19058098

Mineral wool mesh mats with black tear-resistant aluminum foil on one side. Knauf Insulation Fire-teK® DuctProtect 30-90 C SYSTEM with mesh mat Fire-teK® WM 908 GGB / Fire-teK® WM 910 GGB has been developed for use on ventilation ducts and provides passive fire protection for circular ventilation ducts. In addition to providing relevant protection in the event of fire, they also have good thermal and acoustic insulation properties. Maximum diameter of the channel is 1000 mm.
Depending on the fire class, the system requires an insulation thickness of 40, 80 or 100 mm. Thermal conductivity (λ value) 0.040 at 50°C.

Adhesive tape Alu/polyester Okatherm, a-collection

Adhesive tape Alu/polyester Okatherm, a-collection

Art. no.: 19060008

ALU / polyester tape.

Industrial roller ProRox MA920 ALUSC, Rockwool

Rockwool ProRox

Industrial roller ProRox MA920 ALUSC, Rockwool

Art. no.: 472580800

Previously Industrirulle T
Roll of light, fireproof rock wool. One side is coated with armoured, PE-reinforced aluminium foil. Robust product that adapts itself to curved surfaces. Easy to work with, even outdoors. Nominal density 33 kg/m3. Heat insulation of storage tanks, large tanks, and cistern walls.
Maximum recommended operating temperature 250°C.

Cell Rubber Insulation AF/Armaflex AF-5, with increasing insulation thickness (tolerance ± 2.5 mm)

Cell Rubber Insulation AF/Armaflex AF-5, with increasing insulation thickness (tolerance ± 2.5 mm)

Art. no.: 43805028

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1.5%.

Marine insulation SeaRox SL 620, Rockwool

Rockwool SeaRox

Marine insulation SeaRox SL 620, Rockwool

Art. no.: 47415050

Formerly Marine Firebatts 100
Batting for fireproof insulation in approved A constructions.

Armaflex/Ultima cell rubber insulation, plates in rollers, unglued

Armaflex/Ultima cell rubber insulation, plates in rollers, unglued

Art. no.: 19059845

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration.
Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ >7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1, d0.
Temperature range -50°C - +110 °C. When installed outdoors, the Ultima dark must be covered to protect it from UV radiation; this should also be done indoors if needed.

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-2, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43812035

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification BL-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Lamell insulation with reinforced Alu-foil, Austroflex

Lamell insulation with reinforced Alu-foil, Austroflex

Art. no.: 44041102

Glass wool with transverse fibres in lamellas attached to glass-fibre reinforced aluminium foil. Area of application: Heat and condensation insulation of pipes, ventilation channels etc.
Max. temperature: 250° C, foil 80°. Fire class: Surface class 1.

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 19mm (tolerance ± 2.5 mm)

Cell Rubber Insulation HT/Armaflex hoses in length of 2 meters, insulation thickness 19mm (tolerance ± 2.5 mm)

Art. no.: 43206022

Insulation for pipes and tanks with high temperatures as well as with variable temperatures. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer), uv-resistant, oil-resistant Temperature range -50°C - +150 °C. Fire class DL-s3,d0.

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Cell rubber insulation AF/Armaflex, plates in rollers, unglued

Art. no.: 43501408

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda < 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Fire class B L-s3,d0 (outer layer class II). Tg 3176/83: Pipe bushings

Cell Rubber Insulation AF/Armaflex AF-1, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Cell Rubber Insulation AF/Armaflex AF-1, Glued, with increasing insulation thickness (tolerance ± 1.0 mm)

Art. no.: 43811022

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ>10000 High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50°C - +110 °C. Type approval 03391/82: Fire classification B_L-S3-D0 (Y outer layer class II). Type approval 3176/83: Pipe bushings. Length tolerance ± 1,5%.

Armaflex/Ultima Glued Hose 13mm (tolerance ± 1.5 mm)

Armaflex/Ultima Glued Hose 13mm (tolerance ± 1.5 mm)

Art. no.: 43851315

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire properties that give very low smoke development. For use in plumbing and refrigeration. Manufactured according to the EN 14304 in blue colour. High water vapour resistance µ> 7000. Good thermal insulation lambda < 0.040 W/m•K, guaranteed technical quality by externally monitored values. Fire class BL-s1,d0.
Temperature range -50°C - +110 °C. In outdoor use, Ultima should be covered to protect it from UV radiation, even indoors if necessary.

AGM-nail Insulated CH, BM Svets

AGM-nail Insulated CH, BM Svets

Art. no.: 45601029

To be used when installing insulation with web mat or foil in ventilation ducts. pipelines or steel structures. The tray insulation reduces the risk of a poor solder and burn marks on the foil.

Lamell insulation with reinforced Alu-foil, KNAUF

Knauf Insulation

Lamell insulation with reinforced Alu-foil, KNAUF

Art. no.: 19053157

Armaflex/Ultima Glued Hose 19mm (tolerance ± 2.5 mm)

Armaflex/Ultima Glued Hose 19mm (tolerance ± 2.5 mm)

Art. no.: 43851922

Flexible cellular rubber based on a patented synthetic rubber composition with improved fire capacity that gives very low smoke emission. For use in plumbing and cooling systems. Manufactured in accordance with EN 14304 in blue color. High vapor pass resistance µ > 7000. Good thermal insulation capacity lambda < 0.040 W/m•K, guaranteed technical quality through externally monitored values Fire class BL-s1, d0.
Temperature range –50°C - +110° . For outdoor laying, Ultima should be covered to protect from UV radiation, even indoors if required.
NOTE. All glued tubing should be taped over longitudinal slits with Armaflex Ultima tape.

Cellgummiisolering NH/Armaflex Smart, plattor i rullar olimmad

Cellgummiisolering NH/Armaflex Smart, plattor i rullar olimmad

Art. no.: 19058303

This type is coated with glue and is applied directly to the surface without any extra glue. But the surface should be cleaned with a cleansing agent for glue to achieve the best results in mounting.

Pipe Section Thermo PS Pro ALU Insulation thickness 60 mm, Knauf

Knauf Insulation

Pipe Section Thermo PS Pro ALU Insulation thickness 60 mm, Knauf

Art. no.: 47036022

Thermo-teK PS Pro ALU is a circular tube bowl, with non-combustible mineral wool of stone wool.
Thermo-teK PS Pro ALU is made with formaldehyde-free ECOSE® Technology binder and is coated with fiberglass-reinforced aluminum foil. It has been worn on one side for easier installation and equipped with long-term self-adhesive tape.
Thermoelectronics PS Pro ALU is rated for up to EI120 min for wall / ceiling inspirations according to EN 13501-2.

ÖÖ - Cellgummiisolerng NH/Armaflex Smart, slang 13mm (tolerans±1,5 mm)

ÖÖ - Cellgummiisolerng NH/Armaflex Smart, slang 13mm (tolerans±1,5 mm)

Art. no.: 19058247

Insulation/protection for pipes, tanks, and ventilation ducts in the marina sector, shipbuilding, computer rooms, or other areas where halogen-free materials are required in installations. Flexible insulation material with closed cells. Base of synthetic rubber (elastomer) without halogens, chlorides, or bromides. Temperature range -50°C - +110 °C. Fire class DL-s3,d0

Industrial Batts 80 Alu, Rockwool

Industrial Batts 80 Alu, Rockwool

Art. no.: 19061682

ROCKWOOL Industribatts 80 is used for insulating ventilation ducts, tanks, containers, etc., and is a sturdy and rigid sheet of non-combustible, moisture- and water-repellent stone wool. The board has good insulation properties, especially at high temperatures, as well as good dimensional stability and thus also good load-bearing capacity/compressive strength on the surface. Maximum service temperature 250°C. Thermal conductivity (λ-value) 0.042 at 50°C.

Cellular rubber insulation in plates AF/Armaflex, un glued

Cellular rubber insulation in plates AF/Armaflex, un glued

Art. no.: 43506000

Insulation for pipes, ventilation ducts in cooling and climate control installations, as well as for installations where saving energy and preventing condensation are required.
Flexible insulating material with closed cells. Base made of synthetic rubber (elastomer). High water vapour impermeability µ >10000, High heat insulating capacity lambda< 0.033 W/m·K, guaranteed technical quality by means of externally monitored values. Temperature range -50 - +110°C (completely glued only +85°C). Type approval 03391/82: Outer layer class II (Fire class B-S3-D0). Tg 3176/83: Pipe bushings
Delivered with the measurements 2000x500mm

Fire Sealant Nullifire Acrylic FS702

Fire Sealant Nullifire Acrylic FS702

Art. no.: 706184

Fire Sealant Nullifire Acrylic FS702

Fire sealant fss-400

Fire sealant fss-400

Art. no.: 1480431

Fire-classed sealing compound
Firestopp 400 is a fire-resistant water-based acrylic compound with intumescent properties making it swell if exposed to heat. It hardens to a semi-flexible seal and prevents the penetration of fire, smoke, gas and water. Tested and approved for fire classification El 60 / El 120.

Fire sealant fss-400

Fire sealant fss-400

Fire protection kit fs-univers

Fire protection kit fs-univers

Art. no.: 1480444

Universal kit with fire sealing material for cables, pipes and ventilation lead-throughs. The kit includes material for 18 dm² sealed area. FS-Universal is a complete kit for sealing of larger lead-throughs of cables, metal pipes and ventilation ducts in indoor environments (dry). The kit includes the required material for approx. 18 dm² sealed area. Area of use, see Fire sealing guide. Contents: 2 pcs FS-Universal sheets (600 x 1200 × 60 mm) of non-flammable mineral wool with intumescent (heat-swelling) surface layer, 2 × 0.310 l Firestop Sealant 3000 (white), 0.2 kg non-flammable mineral wool for caulking, 3 × fire seal identification labels and installation instructions. Noise reduction index: 51 dB.

Fire protection kit fs-univers

Adhesive CONLIT, Rockwool

Adhesive CONLIT, Rockwool

Art. no.: 47220098

Used for glueing of Conlit discs on steel and concrete. Good resistance to short-term moisture effect but should not be used in constant moist environments.
Conlit Glue is a inorganic adhesive that supplied in two types: "Standard" and "Frost. Glue consumption approximately 0,6m2 on flat surfaces. If joints are also to be glued, increase to approximately 0.8 kg/m2. Upon glueing of smaller steel profiles, the corner area and glue consumption is increased to approximately 1 kg/m2

FIRE PROTECTION COLOR PROTEGA

FIRE PROTECTION COLOR PROTEGA

Art. no.: 1480008T

Eco-Matic 5FR is an opaque, white, halogen-free, water-based elastic vinyl acetate copolymer-dispersion used in the Shot HM system for fireproofing of cable, pipe and ventilation penetrations in fire-resistant building parts. ECOMASTIC 5FR frees water, when it is exposed to high temperatures during a fire, while it forms a hard porcelain-like layer. This endothermic process effectively suppresses the heat flow to the base, delaying combustion and prevents fire spread. ECOMASTIC 5FR is elastic, waterproof, UV and oil resistant and can therefore also be used in areas with high relative humidity and high environmental impact. Registered in Basta.

FIRE PROTECTION COLOR PROTEGA

Fire protection paint Protega Steel

Fire protection paint Protega Steel

Art. no.: 725327

Steel 1001, a white, solid and swelling fire protection paint for load-bearing steel structures indoors that is transformed into a thick foam layer when exposed to high temperatures in the event of fire. Time saving with superior economy. Requires in many cases only half the amount of paint at the same fire classification compared to regular fire protection paint. With Steel 1001, it is no problem to achieve a good result. APPROVAL: ETA 19/0761 for fire insulation of load-bearing steel structures. Fire class R30 - R90.

Showing 52 of 250