Order lines: 0

Ahlsell Products Personal protectionRespiratory protection

Respiratory protection

Filtering half masks

Full-face masks

Filters for full and half masks

Fan-assisted respiratory protection

Compressed air-assisted respiratory protection

Portable gas measuring instruments

Do you need respiratory protection when you work? Ahlsell helps you find the right respirator for your job. Our range includes both respiratory protection and accessories such as filters, fans, visors, protective hoods, and compressed air hoses. Be sure to choose a respirator that meets the required needs. We have everything from half masks and full masks to filtering respirators and escape hoods. Our comfortable and flexible high-quality respirators protect against dust, dirt, and other particles. Explore our wide range of respirators online or visit your nearest Ahlsell store.

Products (226)

Fan kit sundströms

Fan kit sundströms

Art. no.: 564983

Fan package with fan SR 500, full mask SR 200 and visor SR 520/ SR 530/ SR 540.

Half mask Sundström SR 100 Premium Pack

Half mask Sundström SR 100 Premium Pack

Art. no.: 386375

Everything is prepacked in a new practical storage box.

Flight Hood SR 77-3 Smoke/Chem

Flight Hood SR 77-3 Smoke/Chem

Art. no.: 420588

A filtering breathing protector for use in clean-up after a fire and chemical accidents. The hood can quickly and easily be donned without prior adjustment. Vacuum-packed in an aluminium bag lying in a tool case that can be carried on the belt. Storage time: 10-year, no service needed on this product. With filter ABEK1-CO-P3. Warning! Flight hood is only used for the purpose of.flight and not as inset equipment.

Flight Hood SR 77-3 Smoke/Chem

Accessories CleanSpace Pro / Ultra

Accessories CleanSpace Pro / Ultra

Art. no.: 69682557

CST1024: With the cleaning plug properly installed, the fan motor unit can be rinsed under running water.

CST1021: The headband should always be used with the half mask.

Accessories CleanSpace Pro / Ultra

Flight mask MSA Miniescape 10038560

Flight mask MSA Miniescape 10038560

Art. no.: 414907

An escape filter with 5 minute insertion time, manufactured according to the filter technology TabTec. Can be carried in a belt thanks to the practically integrated belt holder. The escape filter is stored in a durable, transparent container that protects the filter from impact and aging. Storage time: 4 years from factory.

Filtering Half mask Zekler 1302V

Filtering Half mask Zekler 1302V

Art. no.: 654820

Compressed air hose Sundström SR 360

Compressed air hose Sundström SR 360

Art. no.: 254278

Used in combination with Sundström’s compressed air equipment. Supplied with CEJN safety couplings. Spiral Light Duty hose.

PAPR KIT SR 500 / SR575

PAPR KIT SR 500 / SR575

Art. no.: 100540

"Package with fan unit SR 500 and safety helmet SR 575 with welding visor SR 574. Contents: fan unit SR 500, safety helmet SR 575 with visor, welding cassette SR 574, passive welding filter density level 10, standard battery, battery charger SR 513, leather belt SR 503, 2-pack particle filter SR 510 P3 R, 2-pack filter adapter, 10-pack pre-filter SR 221, 2-pack steel mesh disc SR 336, 2-pack pre-filter holder, flow meter, plug set, cleaning wipes and instructions for use.
EN 12941:1998 + A2:2008, EN 397, EN 175:1997, EN 166"

Mask 3M silicone

Mask 3M silicone

Art. no.: 252684

Full mask with 3M bayonet holder for filter and used with filter for gas and water vapour and/or particle filter (6000-2000 and 5000 filter series. 6000-series gas/vapour filter and 2000-series particle filter are.mounted directly on mask. 5000 series particle filter is combine with 6000 series.gas filter with the help of 3M filter holder 501. Can also be connected to 3M S-200 compressed air system.

Mask 3M silicone

Mask 3M silicone

Mask 3M silicone

Fan unit Sundström SR 500

Fan unit Sundström SR 500

Art. no.: 262935

Low-weight fan and anatomical shape provide high level of comfort. Simple maneuvring with just one button. Automatic flow regulation. Self-calibrates in accordance with the part of the face and the filter. Unique alarm system with vibration, sound and light signals when there is obstruction to the flow of air, the renewed filter, and the low battery level. Automatic 3-step charger with distinct light diodes that show the charge level on the battery. Fan housing and´electronics are snuggly enclosed in(IP67) to avoid seepage of water because of cleaning. All face combinations are approved by TH3 ort TM3.. Hose is included with the.different face parts,with the exception of full mask SR200, which is ordered separately.

Compressed air hose sundström SR 358

Compressed air hose sundström SR 358

Art. no.: 309697

Used in combination with Sundström’s compressed air equipment. Supplied with CEJN safety couplings.

FULL FACE MASK 3M RAS-931

FULL FACE MASK 3M RAS-931

Art. no.: 70890467

FULL FACE MASK 3M RAS-931

FULL FACE MASK 3M RAS-931

Filter for Respiratory Protection Sundström full mask and half mask

Filter for Respiratory Protection Sundström full mask and half mask

Art. no.: 100831

Suitable for Sundstrom’s partial masks and filter adapter 280-3 for full masks.

Filter for Respiratory Protection Sundström full mask and half mask

Filter for Respiratory Protection Sundström full mask and half mask

Filter for Respiratory Protection Sundström full mask and half mask

Filter for Respiratory Protection Sundström full mask and half mask

Filter for Respiratory Protection Sundström full mask and half mask

Full facemask sundströms sr200

Full facemask sundströms sr200

Art. no.: 254275

Compressed air fed full mask with continuous flow of air for connection via Sundstrom’s compressed air filter via cleaning station SR 99 for compressed air. A standard filter mounted in mask provides protection when pressure falls, or as a back-up. in the event of displacement. Especially developed for heavy and long-lasting work or where pollution is especially hazardous for the health and a high level of protection is required. Made of anti-spark material that allows for its use in.explosive or flammable environments. Air flow 150-320 l/min at a work.pressure of 5-7 bar. control valve. See above Full mask SR200.

Full Face Mask 3M Promask FM3-M/L

Full Face Mask 3M Promask FM3-M/L

Art. no.: 771491

Use the 3M™ Full Face Reusable Respirator FF-300-L to get a durable mask that works both with powered air-purifying respirators and with filters alone. This large-sized mask is compatible with the powered air-purifying respirators 3M™ Versaflo™ TR-600E, 3M™ Versaflo™ TR-800E, and 3M™ PF-602E+, PF-602E-ASB, as well as with filters in the 3M™ DT series, including particle, gas, vapor, and combination filters. The visor (made of polycarbonate or heat-resistant material) provides a good field of vision, and the front speech diaphragm helps to simplify communication. There is also a moisture release at the bottom of the mask that provides extra comfort when worn for extended periods. The five-point rubber head harness contributes to a secure, stable fit. The side filter and the transparent inner mask contribute to good downward visibility. Standard: CE certified according to EN 12942 Class TM3 and EN 136 Class 3.

Filter for Respiratory Protection 3M Full mask and half mask

Filter for Respiratory Protection 3M Full mask and half mask

Art. no.: 276641

Open particle filter:
2000-series filter 2125 and 2135 are open and mounted directly on the body of the mask.
Housed particle filter:
Encased filter that is mounted directly on to the body of the mask.
6035 Protects against dust and insects.
6038 protects against dust, particles and hydrogen fluoride, as well as oppressive odours from organic vapours, and ozone gas under Hgv.
Gas filter:
6000 series gas filter has a bayonet fitting and fits3M`s full and partial masks in 6000 series as well as 3M`s partial mask in 7500 series.
Combination filter:
Particle filters 5925 and 5935 are mounted on the gas filters in 6000-series together with the filter holders 501, and can thereafter be used on all partial and full masks in the 6000 and 7500 series.
Combination filters 6099F, 6098F and 6096F are.used only for full mask 6000.

Filter for Respiratory Protection 3M Full mask and half mask

Filter for Respiratory Protection 3M Full mask and half mask

Filter for Respiratory Protection 3M Full mask and half mask

Filter for Respiratory Protection 3M Full mask and half mask

Filter for Respiratory Protection 3M Full mask and half mask

Half mask moldex

Half mask moldex

Art. no.: 314343

Reusable half mask with removable filter for gas/steam and particulates. Double filter provides longer respiration. Double resistance, better weight disbursement and a better peripheral view.

Half mask 3M 6500QL series

Half mask 3M 6500QL series

Art. no.: 401416

Is designed for tough, dirty environments. Low profile, soft and comfortable face ceiling in silicon. Manufactured as a single piece. Quick Latch function which makes it easy to let down and take up the mask when you move between different workplaces.

Half mask 3M 6500QL series

Half mask 3M 6500QL series

Full Face Mask CleanSpace Pro/Ultra

Full Face Mask CleanSpace Pro/Ultra

Art. no.: 69682559

CleanSpace full face mask protects skin and eyes. The CleanSpace full face mask is equipped with a 5-point rubber headband. There are no objects such as filters in the user's field of vision. Under the rain cover of the full face mask, there is an exhalation valve and a reinforcement membrane for speech. The inner mask does not need to seal against the face but is tasked with directing exhaled air to the exhalation membrane. Eyeglass frames for mounting inside the full face mask are available as accessories. CLEANING: The inner mask can be removed for cleaning. The CleanSpace full face mask is washed with soap and water and wiped with a lint-free cloth or paper. Wet wipes with or without alcohol can also be used for cleaning.

Half mask sr 100

Half mask sr 100

Art. no.: 228854

Partial mask with single adjustable elastic band stand. Very low expiration resistance thanks to two expiration valves. New.pre-filter holder for simple functional control.

Gas Detector Honeywell BW Clip 02 Oxygen

Gas Detector Honeywell BW Clip 02 Oxygen

Art. no.: 662304

Gas detector for two years of continuous operation. Detects and warns of low or high oxygen levels. The detector is activated the first time it is started and is then turned on throughout its entire service life. Neither battery replacement nor sensor is needed during the life of the instrument. Easily applied with a Clip to your equipment.

BW Clip is also available for the following gases:
Hydrogen sulphide H2S and Carbon Monoxide CO"

Filtering Half mask Zekler 1403V

Filtering Half mask Zekler 1403V

Art. no.: 875764

Respirator disposable 3M

Respirator disposable 3M

Art. no.: 69954294

Filtering half-mask which guards against solid and liquid particles. Used in the engineering industry, construction industry, agriculture and other areas where a comfortable and safe protection against hazardous dust is needed. Foldable three-field design, sweat-absorbing material in the nasal pillow, hygienically piece packed.

Respirator disposable 3M

Respirator disposable 3M

Respirator disposable 3M

Respirator disposable 3M

Filtrerande halvmask Moldex Air Plus ProValve 340815

Filtrerande halvmask Moldex Air Plus ProValve 340815

Art. no.: 561717

Filtering half mask that protects against solid and liquid particles in concentration up to 50xHGV. Developed valve that provides less heat and smaller drops in the form of condensation inside the mask. Developed sealing at the nose and no nose clip needed. Flexible locking clamp for better comfort. Used in engineering, construction, agriculture and other areas where a comfortable and secure protection against dangerous particles is needed. Can be cleaned and used for more than one workout. New innovative valve that reduces heat inside the mask and condensation from the exhaled air. Developed contour-shaped seal and no nose clip needed.

Gas detector Honeywell BW Clip H2S Hydrogen sulphide

Gas detector Honeywell BW Clip H2S Hydrogen sulphide

Art. no.: 662303

Gas detector for two years of continuous operation. Detects and warns of high level of hydrogen sulphide H2S. The detector is activated the first time it is started and is then turned on throughout its entire service life. Neither battery replacement nor sensor is needed during the life of the instrument. easily applied with a Clip to your equipment.

BW Clip is also available for the following gases:
Oxygen O2 and Carbon Monoxide CO"

High-capacity particle filter CleanSpace P3

High-capacity particle filter CleanSpace P3

Art. no.: 69682547

CleanSpace high capacity particle filter for the PRO/ULTRA fan units has a longer service life compared to the standard CleanSpace filter (CST1005) due to its larger filter area. The CleanSpace particle filter is categorized as a P3 filter, which provides effective filtration of airborne particles for optimal protection. All combination filters, including gas and chemical filters, are supplied with integrated P3 particle filters to ensure effective filtration of both particles and gases. CleanSpace has developed Intelligent Filter Management Technology (IMFT), which improves the airflow through the filter to maximize its use and efficiency. Each filter is individually identified with an internal memory chip, which allows tracking of the usage time and date at each start-up of the CleanSpace ULTRA. Now, this advanced electronics allows for the programming of an alarm time for the combination filter, meaning that the user is notified when a filter has been used for a predefined time, for example 100 hours. Complies with EN12942:1998+A2:2008 TM3. 3 pieces in the package.

Filter Sundström for SR 500

Filter Sundström for SR 500

Art. no.: 291597

Filters for SUndström respiratory protection system.

Filter Sundström for SR 500

Filter Sundström for SR 500

Filter Sundström for SR 500

Filter Sundström for SR 500

Filter Sundström for SR 500

Mask msa advantage

Mask msa advantage

Art. no.: 359296

Full mask with replaceable gas/fume filter and/or particle filter.

Hood Sundström SR59018

Hood Sundström SR59018

Art. no.: 365309

Protective hood for SR590

Respirator disposable moldex

Respirator disposable moldex

Art. no.: 312974

Filtering half-mask which guards against solid and liquid particles in concentrations of up to 10xHGV. Used in the engineering industry, construction industry, agriculture and other areas where a comfortable and safe protection against hazardous particles is required.

Respirator disposable moldex

Respirator disposable moldex

Respirator disposable moldex

Respirator disposable moldex

Art. no.: 312976

Filtering half-mask which guards against solid and liquid particles in concentrations of up to 50xHGV. Used in the engineering industry, construction industry, agriculture and other areas where a comfortable and safe protection against hazardous particles is required.

Filtering half mask 3M 9300 + G3 series

Filtering half mask 3M 9300 + G3 series

Art. no.: 570080

The third-generation Aura filtering half-mask that protects against solid and liquid particles. A respirator that combines impressive new technology with ergonomic design. Used in engineering, construction, agriculture and other areas where a comfortable and safe protection against hazardous dust is needed. The new comfort valve Cool Flow opens more easily to help lower the heat inside the respirator, providing a more comfortable user experience. Foldable three-field design where the new upper and lower tabs together with the new grip function on the valve make it easier to position and adjust the respiratory protection on the face. The new woven headbands have better durability without sacrificing comfort. Hygienically packaged. M ed the latest technology of exhalation valve.

Filtering half mask 3M 9300 + G3 series

Half mask 3M 4000+ series

Half mask 3M 4000+ series

Art. no.: 662723

Maintenance-free half-mask with low respiratory resistance to gas, vapors and ready-to-use ready-to-use. Carbon and particle filters are integrated with the mesh body and follow its low profile, which does not limit the viewing possibilities. When the filters are exhausted, the entire mask is replaced. Half mask with built-in filters, adjustable headband. The 4000+ series has better comfort thanks to the new improved exhalation valve, which reduces breathing resistance by more than 30 percent. Comes in resealable bag.

Half mask 3M 4000+ series

Half mask 3M 4000+ series

Half mask 3M 4000+ series

Half mask Cleanspace

Half mask Cleanspace

Art. no.: 465194

CleanSpace half mask in silicone, can be ordered in 3 sizes: S-M-L. Used together with CleanSpace 2 art. 465191, CleanSpace Ultra (IP66) art. 465192 or CleanSpace Ex art. 465193.

Full face mask Sundströms SR 200

Full face mask Sundströms SR 200

Art. no.: 244220

Full mask for maximum safety and comfort. Very low breathing resistance through the shape.of the mask and two exhaling valves. For filter,.see comparison below. Can also be used together with Sundstrom’s fanSR500..

Pre-filter ESAB Fresh Air

Pre-filter ESAB Fresh Air

Art. no.: 607830

Pre-filter to ESAB.

Filter to ESAB fan

Filter to ESAB fan

Art. no.: 664587

Pre-, particle and filter for ESAB fans.

Filter to ESAB fan

Mask moldex 900201

Mask moldex 900201

Art. no.: 314345

Reusable, extremely lightweight full mask with replaceable filter for gas/steam and particulates.

Half Mask Compact Moldex 5230

Half Mask Compact Moldex 5230

Art. no.: 393351

Half mask against gas, steam and particles. Carbon and particle filters are integrated into the mask and follow its shape. When the filter is spent, the entire mask has to be replaced. Half mask with built-in filters, adjustable head band. Comes in sealable bag.

Andningsslang 3M

Andningsslang 3M

Art. no.: 309590

Breathing air hoses used together with 3M hood/visor and helmets in combination with turbo unit Jupiter, Versaflo TR300 or compressed air equipment, e.g. Versaflo V500, air cooler/heater Versaflo V100 respectively V200. Breathing air hose BT20, BT30 is used together with hoods of the 3M S series.

Andningsslang 3M

Andningsslang 3M

Compressedair attachment

Compressedair attachment

Art. no.: 278609

Makes it possible to shift between a fan feed and compressed air feed with the same hood/screen/helmet. Especially intended for heavy and long-lasting work where pollution haspoor.wrning properties or is especially. Used together with visor SR 540, hood SR520, SR530, helmetSR580, welding visor SR590. Supplied complete with belt, control valve, warning whistle, and adapter for hose connection to the facial part. Complete with compressed air hose.

Hood 3M S-333 integrated headband

Hood 3M S-333 integrated headband

Art. no.: 309586

The soft hoods are used with battery powered fan units or compressed air systems from 3M, such as Jupiter, Versaflo, or compressed air system V-500. Suitable for use where replacement of the entire head tip is required, for example in the manufacture of pharmaceuticals. Silent and more comfortable fabric made of polypropylene.

Hood 3M S-333 integrated headband

Puhallinsarja 3M™ TR-600E HIK valmispakkaus raskaaseen teollisuuteen

Puhallinsarja 3M™ TR-600E HIK valmispakkaus raskaaseen teollisuuteen

Art. no.: 35687987

Hood Sundström SR 530

Hood Sundström SR 530

Art. no.: 262941

Lightweight hood with chemically treated visor. Adjustable head position and neck width. Hood covers throat and back of neck. Supplied complete with screw.Supplied complete with screw.Supplied complete with sheath. Used together with fans SR500,SR700 and compressed air accessory SR507.

HELMET WITH WELDING VISOR

HELMET WITH WELDING VISOR

Art. no.: 100541

Mask body halfmask 3m

Mask body halfmask 3m

Art. no.: 255469

Reusable partial mask with bayonet fixture. Double filter makes for lower breathing resistance, better weight distribution, and a better peripheral vision. Used with 3M`s exchangeable filter for gas/water vapour, and/or particle filters (6000, 2000, and 5000 filter series). 6000-series gas/vapour filter and 2000-series particle filter are.mounted directly on mask. 5000 series particle filter is combine with 6000 series.gas filter with the help of 3M filter holder 501. Can also be hooked up to 3MS200 compressed air system.

Mask body halfmask 3m

Mask body halfmask 3m

Mask body halfmask 3m

Filtering Half mask Zekler 1402V

Filtering Half mask Zekler 1402V

Art. no.: 875761

Respirator disposable 3M™ 8833 P3

Respirator disposable 3M™ 8833 P3

Art. no.: 309635

Filtering half-mask which guards against solid and liquid particles. Used in the engineering industry, construction industry, agriculture and other areas where a comfortable and safe protection against hazardous dust is needed. The inside shell, with its stable form, gives a soft feeling against the face, while the M-shaped nose bridge follows the contours of the nose. Colour-coded for cotton band for easy identification.

Batteries for 3M fans

Batteries for 3M fans

Art. no.: 393448

Batteries for 3M fans

Half Mask Cleanspace Pro/Ultra

Half Mask Cleanspace Pro/Ultra

Art. no.: 69682539

CleanSpace half mask is delivered with a headband. CleanSpace half mask is available in sizes small, medium, large. ADJUSTMENT: The headband keeps the entire fresh air mask in the correct position. For this reason, the headband should be adjusted to fit the user. The fan motor's bellows are used to adjust the fresh air mask to the user's neck size. MATERIAL: The CleanSpace half mask is transparent and made of comfortable medical-grade silicone. CLEANING: The CleanSpace half mask is washed with soap and water and wiped with a lint-free cloth or paper. Wet wipes with or without alcohol can also be used for cleaning.

Fan motor-CST1000 is sold separately.

Cleaning wipes 3M 40st/pk

Cleaning wipes 3M 40st/pk

Art. no.: 224244

Cleaning wipe for respiratory protection. 40 per pack.

Helmet sundström sr 580

Helmet sundström sr 580

Art. no.: 298880

Protective helmet with visor SR 580 when helmet is required. The helmet has a standard bracket for mounting earmuffs. Control wheel for adjusting size. The visor for the SR 580 is equipped with a transparent polycarbonate sheet tested for class 1 B 3 9, in accordance with EN 166:2001. Used with fan SR500, SR700 and compressed-air attachment SR507. Air through-flow 175-240 l/min when using filter fan SR500, 175-225 l/min when using filter fan SR700. 175-260 l/min when using compressed-air attachment SR507. Protective helmet conforms to EN 397:1995 -30ºC, LD, MM 440 vac.

Showing 52 of 226