Order lines: 0

Ahlsell Products Heating and Sanitation Sprinkler range for sprinkler customersSuspension and fastening

Suspension and fastening

Ahlsell offers a wide range of products for installation projects, such as sprinklers, pipes, and fastening. Whether you work in property management or as an installer within HVAC, you will find everything needed for your next project. Ahlsell's offers a wide range of high-quality products from well-known suppliers and brands on the market. You can find everything from flow meters, alarm valve accessories, and fittings to your installation of sprinklers. Visit one of our stores to learn more about our products or check out the products here in our webshop.

Products (38)

Through-bolt anchor S-KA plus electric zinc-plated

Through-bolt anchor S-KA plus electric zinc-plated

Art. no.: 533937

Through-bolt anchor S-KA plus electric zinc-plated

Through-bolt anchor S-KA plus electric zinc-plated

Brackets Jirva J913S, U-profile, Hot-dip Galvanized FZV

Art. no.: 3820149

Hexagon screw M6S 8.8 galvanized ISO 4017 FIXX

Hexagon screw M6S 8.8 galvanized ISO 4017 FIXX

Art. no.: 560131

M-thread. Hex screw according to ISO 4017 (DIN 933), fully threaded.
Material certificates according to EN10204-3.1 can be downloaded on Ahlsell's website https://www.ahlsell.se/tjanster/certifikat/
To obtain your certificate, enter ahlsell's item number on the label on the packaging and batch number.

Hexagon screw M6S 8.8 galvanized ISO 4017 FIXX

Concrete screw multi-monti+

Concrete screw multi-monti+

Art. no.: 503667

MMS-SS- Hexagonal head with flange. European type approved, ETA 06/0078 Option 1.
Suitable for attachment of consoles and ceiling profiles etc. directly to the concrete without using an extra plate.
I) Permitted load kN in concrete C20/25. * Not covered by the ETA values recommended by the manufacturer. Values within ( ) can be used as recommendation of the manufacturer. Cross load values apply to concrete screws without concrete edge impact.

Concrete screw multi-monti+

Brackets JU913S FZV, Hot-dip Galvanized FZV

Brackets JU913S FZV, Hot-dip Galvanized FZV

Art. no.: 3820248

Brackets JU913S FZV, Hot-dip Galvanized FZV

Standard overflow clamp

Standard overflow clamp

Art. no.: 3809228

The Standard type. With fixing holes, 11 mm diameter.

Concrete screw M8/M10 Internal thread FZB

Concrete screw M8/M10 Internal thread FZB

Art. no.: 4443777

Concrete screw M8/M10 internal thread FZB. Approved for cracked and uncracked concrete C20/25 to C50/60

Threaded rod zpl 4.6 din 976

Threaded rod zpl 4.6 din 976

Art. no.: 289034

M-thread. In accordance with DIN 976. Steel 4.6 bright galvanised. Deburred.

Threaded rod zpl 4.6 din 976

Solid Clamp EF for Sprinkler, MEFA

Solid Clamp EF for Sprinkler, MEFA

Art. no.: 3787728

Solid Clamp EF for Sprinkler, MEFA

Solid Clamp EF for Sprinkler, MEFA

Solid Clamp EF for Sprinkler, MEFA

Solid Clamp EF for Sprinkler, MEFA

Solid Clamp EF for Sprinkler, MEFA

Round iron brackets FZB, electro-galvanized

Round iron brackets FZB, electro-galvanized

Art. no.: 3819570

Balk clamp EF TKN, MEFA

Balk clamp EF TKN, MEFA

Art. no.: 3804744

Balk clamp EF TKN, MEFA

Balk clamp EF TKN, MEFA

Flange nut M6MF Ribbed zinc plated DIN 6923 FIXX

Flange nut M6MF Ribbed zinc plated DIN 6923 FIXX

Art. no.: 560355

M-thread. Hexnut nut with flange and locking teeth According to DIN 6923 (ISO 4161). Steel Class 8 galvanized. With locking teeth (ribbed)
Material certificates according to EN10204-3.1 can be downloaded on Ahlsell's website
To obtain your certificate, enter ahlsell's item number on the label on the packaging and batch number.

Flange nut M6MF Ribbed zinc plated DIN 6923 FIXX

Blade sleeve zpl

Blade sleeve zpl

Art. no.: 3820966

Blade sleeves, electroplated with zinc.

Shaft bracket, U-profile, hot-dip galvanized FZV

Art. no.: 19045865

Shaft bracket. Corresponding to universal bracket J913 and J913S, but with the suspended support’s profile opening upwards so that the holes are on the sides. Suitable for installations in shafts, etc.

Roundwasher brb

Roundwasher brb

Art. no.: 178825

Round washer in accordance to SS 70/SS3576. Steel HV 200 untreated. The washer meets the requirements for screw joints in strength class C 8.8.

Roundwasher brb

Split clamps FFZV type standard

Split clamps FFZV type standard

Art. no.: 3808318

Supplied without screw and nut.

Expansion anchor s-ka zpl

Expansion anchor s-ka zpl

Art. no.: 233383W

S-KA- Zinc-plated. European type approved, ETA 08/0173 Option 1- cracked and uncracked concrete.
S-KA through cut expander is a torque tightened expander for use in cracked and uncracked concrete. It can also be used for installation in homogeneous substrate as full brick (but max M8)) and natural stone. The expander is of even thickness and can therefore be installed directly through the component. It can be used indoors and in mostly dry areas.

1) Drill a hole according to the table in the mounting data below 2) Using a brush and blow pump, clean the hole 3) Push in the expander 4) Tighten the expander to the recommended torque.

I) Permitted loads, kN in concrete C20/25.
* Not covered by the ETA values recommended by the manufacturer.
Cross load values apply to attachment without concrete edge impact.

Hexagonal screw M6S 8.8 ZPL, ISO 4017

Hexagonal screw M6S 8.8 ZPL, ISO 4017

Art. no.: 101921

M-thread. Hexagonal screw in accordance with ISO 4017 , (DIN 933) fully threaded.

Hexagonal screw M6S 8.8 ZPL, ISO 4017

Beam clamp for heavier mounting with unthreaded hole CADDY

Beam clamp for heavier mounting with unthreaded hole CADDY

Art. no.: 1511561

Surface treatment: Electrolytically zinc-coated version (-1). Recommended for indoor use in non-corrosive environments.
TKNM = Threaded hole
TKN = Unthreaded hole

Beam clamp for heavier mounting with unthreaded hole CADDY

Ceiling mount for U-profile pendulum iron

Art. no.: 3820175

Prices are always stated per piece. Type U2 = 2 mm material thickness. U3 = 3 mm material thickness.

Roundwasher brb hdg

Roundwasher brb hdg

Art. no.: 122216

Round washer in accordance with SS 70/SS3576 and ISO 7089. Steel HV200 hot-tip galvanised. The washer meets the requirements for screw joints in strength class C 8.8.

Roundwasher brb hdg

THREADED ROD 4.6 Zpl

THREADED ROD 4.6 Zpl

Art. no.: 3820941

M-thread. In accordance with DIN 976. Steel 4.6 bright galvanised.

THREADED ROD 4.6 Zpl

Folding bracket EF VDS, MEFA

Folding bracket EF VDS, MEFA

Art. no.: 4436356

Folding bracket EF VDS, MEFA

Folding bracket EF VDS, MEFA

Folding bracket EF VDS, MEFA

Z-iron

Art. no.: 3820065

Recommended maximum load: 0.3 kN. Zinc Plated Galv.

Ceiling mount for U-profile pendulum iron, extra heavy-duty

Art. no.: 19036090

Roof iron in hot-dip galvanized steel U4-60. The prices are given in units per piece.

Brackets U4-60S, U-profile, hot-dip galvanized FZV

Art. no.: 3820310

For sprinkler installation.

L-iron

Art. no.: 19045862

Clamp wrap for thicker steel pipes

Clamp wrap for thicker steel pipes

Art. no.: 3803160

Coarser type. Zinc Plated Galv. Hole diameter 9.0 mm for dimensions up to 139.7 mm, and larger with hole diameter 11 mm.

Clamp wrap for thicker steel pipes

Clamp wrap for thicker steel pipes

Clamp wrap for thicker steel pipes

Clamp wrap for thicker steel pipes

Clamp wrap for thicker steel pipes

Overflow clamp type J 911

Overflow clamp type J 911

Art. no.: 3809243

The 40 mm width allows them to be fitted to Jirva construction profiles type C with 22 mm duct opening.

Overflow clamp type J 911

Beam clamp for heavier mounting internal thread CADDY

Beam clamp for heavier mounting internal thread CADDY

Art. no.: 1511562

Caddy beam bracket / beam clamps for heavier mounting with threaded holes. FM / VdS approved for sprinkler installations.

Splice nut M6HM galvanized FIXX

Splice nut M6HM galvanized FIXX

Art. no.: 3879213

M-thread. Splice nut with hexagon. Steel Class 6 galvanized.

Splice nut M6HM galvanized FIXX

Sprinkler brackets in FZV

Sprinkler brackets in FZV

Art. no.: 19045863

Balk clamp for heavier installations with non-threaded hole, Caddy

Balk clamp for heavier installations with non-threaded hole, Caddy

Art. no.: 3894068

Threaded Rod EF, MEFA

Threaded Rod EF, MEFA

Art. no.: 3871014

Threaded Rod EF, MEFA

Threaded Rod EF, MEFA

Threaded Rod EF, MEFA

Threaded Rod EF, MEFA

Threaded Rod EF, MEFA

Pear Swivel for Sprinkler, MEFA

Pear Swivel for Sprinkler, MEFA

Art. no.: 3787734

Pear Swivel for Sprinkler, MEFA

Pear Swivel for Sprinkler, MEFA

Pear Swivel for Sprinkler, MEFA

Pear Swivel for Sprinkler, MEFA

Pear Swivel for Sprinkler, MEFA

Trapezoidal plate bracket EF VdS, MEFA

Trapezoidal plate bracket EF VdS, MEFA

Art. no.: 4024385

Trapezoidal plate bracket EF VdS, MEFA

L-Iron, Stiglöv

L-Iron, Stiglöv

Art. no.: 3857523

L-iron in steel or stainless material with 11 mm hole.

Concrete screw hexagon head with washer

Concrete screw hexagon head with washer

Art. no.: 4443779

Hexagon head concrete screw with washer.

Concrete screw hexagon head with washer

Concrete screw hexagon head with washer

Showing 38 of 38