Order lines: 0

Ahlsell Products Heating and SanitationSprinkler

Sprinkler

Grooved pipe parts

Sprinkler hose and accessories

Valves & Filter

Accessories/Consumables

Sprinkler accessories

Flow switches, pressure controls & Switches

Flow controller

Alarm valve accessories

Aucated fittings

Steel pipe parts forged

Press system stainless

Suspension and fastening

Ahlsell offers a wide range of products for installation projects, such as sprinklers, pipes, and fastening. Whether you work in property management or as an installer within HVAC, you will find everything needed for your next project. Ahlsell's offers a wide range of high-quality products from well-known suppliers and brands on the market. You can find everything from flow meters, alarm valve accessories, and fittings to your installation of sprinklers. Visit one of our stores to learn more about our products or check out the products here in our webshop.

Grooved flange adapter, Red

Grooved flange adapter, Red

Art. no.: 1356110

Grooved flange (GAF)
To create a transition from flanged pipe systems/components to worn -out systems.
PN 16 (EN 1092-2).
The worn flange can withstand up to 20.7 bar maximum working pressure.

Grooved flange adapter, Red

Grooved flange adapter, Red

Grooved flange adapter, Red

Center Punch with Magnet

Center Punch with Magnet

Art. no.: 19045546

Roundwasher brb hdg

Roundwasher brb hdg

Art. no.: 500405

Round washer in accordance with SS 70/SS3576 and ISO 7089. Steel HV200 hot-tip galvanised. The washer meets the requirements for screw joints in strength class C 8.8.

Grooved lightweight pipes, longitudinally welded, powder coated, 3m lengths

Grooved lightweight pipes, longitudinally welded, powder coated, 3m lengths

Art. no.: 1348832

Product description
NordicFlow® lightweight pipe is manufactured according to EN 10217-1 and is approved by FM. The pipes are cold-formed, longitudinally welded and precision-cut. C factor is 130 and the pipe is factory grooved according to OGS (Original Grooving System) in accordance with AWWA-C606. The pipes are blast-blasted and are available in two finishes. Epoxy powder coated pipes in gray (RAL 7012) with 70 μm for corrosivity class C1 and C2 and hot-dip galvanized surface treatment for corrosivity class C3. They are available in 6 and 3 meter lengths.
Areas of use
• Sprinkler system
• VS installations
o Heat
o Cooling
• Compressed air system

Corrosivity class

• Gray epoxy powder coated pipes with min. 70 μm in gray RAL 7012 is for corrosivity classes C1 and C2
• Hot-dip galvanized pipes with min. 55 μm EN 10240-A1 (Type E) pipe is for corrosivity class C3.

Approval
NordicFlow® Lightweight pipes have FM approval and the pipes are also FM approved together with PROFITS FITPRO (Ahlsell's quick coupling), butt coupling, and also with Victaulic 009N.
The painted pipes are tested in the salt spray test in accordance with UNI EN ISO 12944-6 for 480 hours with approved results.
In addition, Ahlsell has a certificate from SBSC and the products are assessed by Sundahus and the construction goods assessment.

Grooved lightweight pipes, longitudinally welded, powder coated, 3m lengths

Grooved lightweight pipes, longitudinally welded, powder coated, 6m lengths

Grooved lightweight pipes, longitudinally welded, powder coated, 6m lengths

Art. no.: 1348823

Product description
NordicFlow® lightweight pipe is manufactured according to EN 10217-1 and is approved by FM. The pipes are cold-formed, longitudinally welded and precision-cut. C factor is 130 and the pipe is factory grooved according to OGS (Original Grooving System) in accordance with AWWA-C606. The pipes are blast-blasted and are available in two finishes. Epoxy powder coated pipes in gray (RAL 7012) with 70 μm for corrosivity class C1 and C2 and hot-dip galvanized surface treatment for corrosivity class C3. They are available in 6 and 3 meter lengths.
Areas of use
• Sprinkler system
• VS installations
o Heat
o Cooling
• Compressed air system

Corrosivity class

• Gray epoxy powder coated pipes with min. 70 μm in gray RAL 7012 is for corrosivity classes C1 and C2
• Hot-dip galvanized pipes with min. 55 μm EN 10240-A1 (Type E) pipe is for corrosivity class C3.

Approval
NordicFlow® Lightweight pipes have FM approval and the pipes are also FM approved together with PROFITS FITPRO (Ahlsell's quick coupling), butt coupling, and also with Victaulic 009N.
The painted pipes are tested in the salt spray test in accordance with UNI EN ISO 12944-6 for 480 hours with approved results.
In addition, Ahlsell has a certificate from SBSC and the products are assessed by Sundahus and the construction goods assessment.

Grooved lightweight pipes, longitudinally welded, powder coated, 6m lengths

Grooved lightweight pipes, longitudinally welded, hot-dip galvanized, 6m lengths

Grooved lightweight pipes, longitudinally welded, hot-dip galvanized, 6m lengths

Art. no.: 1348841

Product description
NordicFlow® lightweight pipe is manufactured according to EN 10217-1 and is approved by FM. The pipes are cold-formed, longitudinally welded and precision-cut. C factor is 130 and the pipe is factory grooved according to OGS (Original Grooving System) in accordance with AWWA-C606. The pipes are blast-blasted and are available in two finishes. Epoxy powder coated pipes in gray (RAL 7012) with 70 μm for corrosivity class C1 and C2 and hot-dip galvanized surface treatment for corrosivity class C3. They are available in 6 and 3 meter lengths.
Areas of use
• Sprinkler system
• VS installations
o Heat
o Cooling
• Compressed air system

Corrosivity class

• Gray epoxy powder coated pipes with min. 70 μm in gray RAL 7012 is for corrosivity classes C1 and C2
• Hot-dip galvanized pipes with min. 55 μm EN 10240-A1 (Type E) pipe is for corrosivity class C3.

Approval
NordicFlow® Lightweight pipes have FM approval and the pipes are also FM approved together with PROFITS FITPRO (Ahlsell's quick coupling), butt coupling, and also with Victaulic 009N.
The painted pipes are tested in the salt spray test in accordance with UNI EN ISO 12944-6 for 480 hours with approved results.
In addition, Ahlsell has a certificate from SBSC and the products are assessed by Sundahus and the construction goods assessment.

Grooved lightweight pipes, longitudinally welded, hot-dip galvanized, 6m lengths

Expansion anchor s-ka zpl

Expansion anchor s-ka zpl

Art. no.: 233383W

S-KA- Zinc-plated. European type approved, ETA 08/0173 Option 1- cracked and uncracked concrete.
S-KA through cut expander is a torque tightened expander for use in cracked and uncracked concrete. It can also be used for installation in homogeneous substrate as full brick (but max M8)) and natural stone. The expander is of even thickness and can therefore be installed directly through the component. It can be used indoors and in mostly dry areas.

1) Drill a hole according to the table in the mounting data below 2) Using a brush and blow pump, clean the hole 3) Push in the expander 4) Tighten the expander to the recommended torque.

I) Permitted loads, kN in concrete C20/25.
* Not covered by the ETA values recommended by the manufacturer.
Cross load values apply to attachment without concrete edge impact.

Bend 45° with 1 socket, reduced, black, internal and external thread. Internal no. 40.

Bend 45° with 1 socket, reduced, black, internal and external thread. Internal no. 40.

Art. no.: 1266055

Bend 45° with 1 socket, reduced, black, internal and external thread. Internal no. 40.

Union coupling with external thread stainless 316L/Brass A-press, a-collection

Union coupling with external thread stainless 316L/Brass A-press, a-collection

Art. no.: 1454778

Pressed with the M-gradients.
12-54 mm with press indicator.

Union coupling with external thread stainless 316L/Brass A-press, a-collection

Roundwasher brb

Roundwasher brb

Art. no.: 178821

Round washer in accordance to SS 70/SS3576. Steel HV 200 untreated. The washer meets the requirements for screw joints in strength class C 8.8.

Concrete screw multi-monti+

Concrete screw multi-monti+

Art. no.: 454989

MMS-SS- Hexagonal head with flange. European type approved, ETA 06/0078 Option 1.
Suitable for attachment of consoles and ceiling profiles etc. directly to the concrete without using an extra plate.
I) Permitted load kN in concrete C20/25. * Not covered by the ETA values recommended by the manufacturer. Values within ( ) can be used as recommendation of the manufacturer. Cross load values apply to concrete screws without concrete edge impact.

Concrete screw multi-monti+

THREADED ROD 4.6 Zpl

THREADED ROD 4.6 Zpl

Art. no.: 114158

M-thread. In accordance with DIN 976. Steel 4.6 bright galvanised.

Thread oil ridgid

Thread oil ridgid

Art. no.: 120669V

Mineral-based oil. Protects threading dies and thread sections. Fast lubrication and cooling. Suitable for threading of steel and stainless steel. Contains sulphur but is free from chlorine and silicon.

Thread oil ridgid

Thread oil tilia

Thread oil tilia

Art. no.: 2590005

Thread oil that is completely biodegradable, for threading, drilling and punching in all materials, such as stainless steel acid-resistant, aluminium, steel and others. The thread oil gives minimal friction resistance, less wear on tools, better threads and a higher surface finish. Has an extremely high lubricating and cooling effect.

Thread oil tilia

Beam clamp for heavier mounting with unthreaded hole CADDY

Beam clamp for heavier mounting with unthreaded hole CADDY

Art. no.: 1511561

Surface treatment: Electrolytically zinc-coated version (-1). Recommended for indoor use in non-corrosive environments.
TKNM = Threaded hole
TKN = Unthreaded hole

Beam clamp for heavier mounting with unthreaded hole CADDY

Steel pipes, blue, SMS 326 threaded without collar

Steel pipes, blue, SMS 326 threaded without collar

Art. no.: 1221200

SS-EN 10255. SMS 326. Material S195.

Steel pipes, blue, SMS 326 threaded without collar. In lengths of 3 meters

Steel pipes, blue, SMS 326 threaded without collar. In lengths of 3 meters

Art. no.: 1221229

SS-EN 10255. SMS 326. Material S195.

O-rings for A-press, electroplated zinc and stainless steel with EPDM (Standard), a-collection

O-rings for A-press, electroplated zinc and stainless steel with EPDM (Standard), a-collection

Art. no.: 1454755

Steam, only EPDM can be used.
If there is oil/oil mist in the compressed air system, FPM O collar must be used.
PLEASE NOTE! Only for A-press zinc-electroplated and stainless press parts –20º– +85ºC – +120ºC. If uncertain, please contact your Ahsell sales representative.

O-rings for A-press, electroplated zinc and stainless steel with EPDM (Standard), a-collection

O-rings for A-press, electroplated zinc and stainless steel with FPM, a-collection

O-rings for A-press, electroplated zinc and stainless steel with FPM, a-collection

Art. no.: 1454768

For oil and fuel. Not steam.
PLEASE NOTE! Only for A-press zinc-electroplated and stainless press parts. If uncertain, please contact your Ahsell sales representative.
Sold only in unbroken package.

O-rings for A-press, electroplated zinc and stainless steel with FPM, a-collection

O-rings for A-press, electroplated zinc and stainless steel with EPDM (Standard) with LBP function, a-collection

O-rings for A-press, electroplated zinc and stainless steel with EPDM (Standard) with LBP function, a-collection

Art. no.: 1454792

Steam, only EPDM can be used.
If there is oil/oil mist in the compressed air system, FPM O collar must be used.
PLEASE NOTE! Only for A-press zinc-electroplated and stainless press parts. If uncertain, please contact your Ahsell sales representative.
Sold only in unbroken package.

O-rings for A-press, electroplated zinc and stainless steel with EPDM (Standard) with LBP function, a-collection

Stainless steel pipe 316 L 6M, A-press, a-collection

Stainless steel pipe 316 L 6M, A-press, a-collection

Art. no.: 1454547

For drinking water installations. Un-annealed pipes.
Stated price applies per metre.

Stainless steel pipe 316 L 6M, A-press, a-collection

Sleeves stainless 316L, A-press, a-collection

Sleeves stainless 316L, A-press, a-collection

Art. no.: 1454400

Pressed with the M-gradients.
12-54 mm with press indicator.

Sleeves stainless 316L, A-press, a-collection

Sleeves stainless 316L, A-press, a-collection

Sliding sleeve stainless steel 316L, A-press, a-collection

Sliding sleeve stainless steel 316L, A-press, a-collection

Art. no.: 1454407

Pressed with the M-gradients.
12-54 mm with press indicator.

Sliding sleeve stainless steel 316L, A-press, a-collection

Sliding sleeve stainless steel 316L, A-press, a-collection

Bend 90° with 2 sockets, stainless steel 316L, A-press, a-collection

Bend 90° with 2 sockets, stainless steel 316L, A-press, a-collection

Art. no.: 1454414

Pressed with the M-gradients.
12-54 mm with press indicator.

Bend 90° with 2 sockets, stainless steel 316L, A-press, a-collection

Bend 90° with 2 sockets, stainless steel 316L, A-press, a-collection

Bend 90° with 1 socket, stainless steel 316L, A-press, a-collection

Bend 90° with 1 socket, stainless steel 316L, A-press, a-collection

Art. no.: 1454421

Pressed with the M-gradients.
12-54 mm with press indicator.

Bend 90° with 1 socket, stainless steel 316L, A-press, a-collection

Bend 45° with 2 sockets, stainless steel 316L, A-press, a-collection

Bend 45° with 2 sockets, stainless steel 316L, A-press, a-collection

Art. no.: 1454428

Pressed with the M-gradients.
12-54 mm with press indicator.

Bend 45° with 2 sockets, stainless steel 316L, A-press, a-collection

Bend 45° with 1 socket, stainless steel 316L, A-press, a-collection

Bend 45° with 1 socket, stainless steel 316L, A-press, a-collection

Art. no.: 1454435

Pressed with the M-gradients.
12-54 mm with press indicator.

Bend 45° with 1 socket, stainless steel 316L, A-press, a-collection

90° bend stainless 316L, A-press, a-collection

90° bend stainless 316L, A-press, a-collection

Art. no.: 1454442

A-press Rfr – pipe parts of stainless steel 316L with heat- and ageing-resistant sealing rings. Joined using press tool.

90° bend stainless 316L, A-press, a-collection

Reduction stainless 316L, A-press, a-collection

Reduction stainless 316L, A-press, a-collection

Art. no.: 1442479

Pressed with the M-gradients.
12-54 mm with press indicator.

Reduction stainless 316L, A-press, a-collection

T-pipe, stainless steel 316L, A-press, a-collection

T-pipe, stainless steel 316L, A-press, a-collection

Art. no.: 1454465

Pressed with the M-gradients.
12-54 mm with press indicator.

T-pipe, stainless steel 316L, A-press, a-collection

T-pipe with reduced branch, stainless steel 316L, A-press

T-pipe with reduced branch, stainless steel 316L, A-press

Art. no.: 1454473

Pressed with the M-gradients.
12-54 mm with press indicator.

T-pipe with reduced branch, stainless steel 316L, A-press

T-pipe with reduced branch, stainless steel 316L, A-press

T-pipe with reduced branch, stainless steel 316L, A-press

T-pipe with reduced branch, stainless steel 316L, A-press

T-pipe with reduced branch, stainless steel 316L, A-press

T-pipe with internal thread branch, stainless steel 316L, A-press, a-collection

T-pipe with internal thread branch, stainless steel 316L, A-press, a-collection

Art. no.: 1454489

Pressed with the M-gradients.
12-54 mm with press indicator.

T-pipe with internal thread branch, stainless steel 316L, A-press, a-collection

Transition sleeve with external thread, 316L stainless steel A-press, a-collection

Transition sleeve with external thread, 316L stainless steel A-press, a-collection

Art. no.: 1445863

Pressed with the M-gradients.
12-54 mm with press indicator.

Transition sleeve with external thread, 316L stainless steel A-press, a-collection

Transition sleeve with internal thread, 316L stainless steel A-press, a-collection

Transition sleeve with internal thread, 316L stainless steel A-press, a-collection

Art. no.: 1454535

Pressed with the M-gradients.
12-54 mm with press indicator.

Transition sleeve with internal thread, 316L stainless steel A-press, a-collection

Angle 90° 1-muff external thread stainless steel 316L A-press, a-collection

Angle 90° 1-muff external thread stainless steel 316L A-press, a-collection

Art. no.: 1454453

Pressed with the M-gradients.
12-54 mm with press indicator.

Angle 90° 1-muff external thread stainless steel 316L A-press, a-collection

Angle 90° 1-muff external thread stainless steel 316L A-press, a-collection

Angle 90° 1-muff external thread stainless steel 316L A-press, a-collection

Angle 90° 1-muff internal thread stainless steel 316L A-press, a-collection

Angle 90° 1-muff internal thread stainless steel 316L A-press, a-collection

Art. no.: 1454460

Pressed with the M-gradients.
12-54 mm with press indicator.

Angle 90° 1-muff internal thread stainless steel 316L A-press, a-collection

Connection end 1-sleeve, stainless steel 316L, A-press, a-collection

Connection end 1-sleeve, stainless steel 316L, A-press, a-collection

Art. no.: 1454525

Pressed with the M-gradients.
12-54 mm with press indicator.
Running nut of gunmetal.

Connection end 1-sleeve, stainless steel 316L, A-press, a-collection

Head Stainless Steel 316L, A-press, a-collection

Head Stainless Steel 316L, A-press, a-collection

Art. no.: 1454518

Pressed with the M-gradients.
12-54 mm with press indicator.

Head Stainless Steel 316L, A-press, a-collection

Joining pipe forged, with sleeve and nut, steel, black, internal and external threads. No. 5a, SS-EN 10241

Joining pipe forged, with sleeve and nut, steel, black, internal and external threads. No. 5a, SS-EN 10241

Art. no.: 1241025

Forged, black welding nipple, P 235GH, Cert., SS-EN 10241

Forged, black welding nipple, P 235GH, Cert., SS-EN 10241

Art. no.: 1241510

External thread, DIN 2982. Corticate on request.

Nipple Pipe, Forged, Steel, Black, External Thread, No. 23, SS-EN 10241

Nipple Pipe, Forged, Steel, Black, External Thread, No. 23, SS-EN 10241

Art. no.: 1241611

Bend 90°, forged, black, internal and external thread, No. 6, SS-EN 10241

Bend 90°, forged, black, internal and external thread, No. 6, SS-EN 10241

Art. no.: 1242239

90° angle fitting, black, forged, internal thread No. 13, SS-EN 10241

90° angle fitting, black, forged, internal thread No. 13, SS-EN 10241

Art. no.: 1243138

T-connector, black, forged, internal thread. No. 14, SS-EN 10241

T-connector, black, forged, internal thread. No. 14, SS-EN 10241

Art. no.: 1244029

Planed Socket, forged, black, internal thread, No. 16, SS-EN 10241

Planed Socket, forged, black, internal thread, No. 16, SS-EN 10241

Art. no.: 1246008

Non certificate article

Hexagonal nipple, forged, black, ext. thread. No 34, SS-EN 10241

Hexagonal nipple, forged, black, ext. thread. No 34, SS-EN 10241

Art. no.: 1246321

Forged fittings, black, No. 33, SS-EN 10241

Forged fittings, black, No. 33, SS-EN 10241

Art. no.: 1246628

Half coupling flat forged, black, int. thread SS-EN 10241

Half coupling flat forged, black, int. thread SS-EN 10241

Art. no.: 1247014

Non certificate article.

Plug, Forged, Black, Male, Nr 20, SS-EN 10241

Plug, Forged, Black, Male, Nr 20, SS-EN 10241

Art. no.: 1248715

Certificate provided on request.

End cap, forged, black, internal thread. No. 19, SS-EN 10241

End cap, forged, black, internal thread. No. 19, SS-EN 10241

Art. no.: 1249036

Socket, forged, black, in pressure vessel quality according to P235GH-TC1, SS-EN 10241

Socket, forged, black, in pressure vessel quality according to P235GH-TC1, SS-EN 10241

Art. no.: 1249317

Certificate provided on request.

Straight coupling forged, black, with conical seal, internal thread, No. 10a, SS-EN 10241

Straight coupling forged, black, with conical seal, internal thread, No. 10a, SS-EN 10241

Art. no.: 1252733

With conical seal.

Showing 52 of 307