Order lines: 0

Ahlsell Products Heating and Sanitation Installation pipes and parts Domestic hot water systemPipe systems PEX Ahlsell

Pipe systems PEX Ahlsell

Ahlsell Rörsystem Pex är ett typgodkänt rörsystem, SP Sitac SC0507-12 som består av Pex rör i rör, läckagesäkra fördelarskåp som tillsammans med system Vatette installationsprodukter och väggkopplingssystem är testat och uppfyller kraven enligt Nordtest VVS 129. Våra tester är utförda på SP Sveriges Tekniska Forskningsinstitut. Komponenterna som ingår är anpassade till branschregler Säker Vatteninstallation. Ahlsell AB garanterar produkternas funktion om branschreglerna och produkternas monteringsanvisningar följs.

Tillhörande installations-och vägggenomföringsprodukter inom System Vatette är (för ytterligare information se www.vatette.se);

1880320 Vatette Plast, fördelarset, 2 x 15x2,5mm
1880321 Vatette Plast, fördelarset, 2 x 16x2,0mm
1880322 Vatette Plast, fördelarset, 3 x 15x2,5mm
1880323 Vatette Plast, fördelarset, 3 x 16x2,0mm
1880324 Vatette Plast, fördelarset, 4 x 15x2,5mm
1880325 Vatette Plast, fördelarset, 4 x 16x2,0mm
1879200 Vatette Väggbockfixtur
1946087 Vatette dubbelmutter 15 mm
1946088 Vatette dubbelmutter 22 mm
1946089 Vatette dubbelmutter 22xxG20
8547102 Vatette fullflödesventil vinkel, Röd
8547103 Vatette fullflödesventil vinkel, Blå

Detta system är anpassat till Branschregler Säker Vatteninstallation. Ahlsell Sverige AB garanterar systemets funktion om branschreglerna och monteringsanvisningarna följs.

Plastic Clip, Single for Plastic and Protective Pipes, a-collection

Plastic Clip, Single for Plastic and Protective Pipes, a-collection

Art. no.: 1878779

Made of polyamide in a simple design and fitted with electro-galvanised screws.

Plastic Clip, Double for Plastic and Protective Pipes, a-collection

Plastic Clip, Double for Plastic and Protective Pipes, a-collection

Art. no.: 1878782

Made of polyamide for 2 protection pipes and fitted with electro-galvanised screws.

Nail clip single for plastic and protective pipes against concrete, a-collection

Nail clip single for plastic and protective pipes against concrete, a-collection

Art. no.: 1878785

Made of polyamide for fixing protection pipes to concrete. Pre-drilled with 8 mm holes.

Nail clip double for plastic and protective pipes against concrete, a-collection

Nail clip double for plastic and protective pipes against concrete, a-collection

Art. no.: 1878786

Made of polyamide for fixing protection pipes to concrete. Pre-drilled with 8 mm holes.

Pipe penetration for pipe and protective pipe against insulation, a-collection

Pipe penetration for pipe and protective pipe against insulation, a-collection

Art. no.: 1878787

Of polyamide with barbs. For fixing pipes and protection pipes to insulation material.

Pipe bending support, a-collection

Pipe bending support, a-collection

Art. no.: 2430665

Galvanised and plastic design, designed for a-collection conduits.

End seal, a-collection

End seal, a-collection

Art. no.: 2430816

End seal of plastic, designed for sealing between a-collection composite pipes and conduits.

Connector sleeve, a-collection

Connector sleeve, a-collection

Art. no.: 1879353

Made of rubber, designed for splicing of a-collection conduits.

Distribution cabinet, leak-proof, a-collection

Distribution cabinet, leak-proof, a-collection

Art. no.: 1880326

The cabinets are supplied with brackets mounted, flexible fastening strips, and pipe penetrations for feed and connection lines. Transparent splash guard included. Drain elbow with cover lid for leak indication included. 1 fixing plate for 25 or 28/34 included with cabinet. a-collection cabinet penetration is used to seal between the protective pipe and the manifold cabinet.
The a-collection 400 includes 11 penetrations for 25 mm protective pipes and 4 for 28/34 mm protective pipes, pre-installed. The a-collection 550 includes 17 penetrations for 25 mm protective pipes and 4 for 28/34 mm protective pipes, pre-installed. For installation instructions. The cabinet is intended for wall mounting.

The cabinet is tested and meets requirements in accordance with Nordtest VVS129 as well as requirements in accordance with industry rules, Säker Vatteninstallation (Safe Water Installation).

Frame with door for distribution cabinet, a-collection

Frame with door for distribution cabinet, a-collection

Art. no.: 1880329

A-collection frame with cover for a-collection manifold cabinet 550. Made of aluminium. White-lacquered RAL9016.

Plastic clamp with a screw, single for plastic and protective tubes, a-collection

Plastic clamp with a screw, single for plastic and protective tubes, a-collection

Art. no.: 1878778

Manufactured from polyamide Plast / FZB in single version equipped with electro-galvanized screw. The screw is loose in the packaging.

Cover lid for leak indicator to distribution cabinet, a-collection

Cover lid for leak indicator to distribution cabinet, a-collection

Art. no.: 1882065

Cover of a collection of parts.

Showing 12 of 12