Order lines: 0

Ahlsell Products Heating and SanitationInstallation pipes and parts

Installation pipes and parts

Compression ring couplings

Mini ball valves

Support sockets

Capillary and copper tube sections

T-plus couplings

Hose couplings metal

Connection hoses

Domestic hot water system

Underfloor heating systems

Water meter cabinet

Plastic pipe system industrial

Do you need installation pipes for your HVAC project? At Ahlsell, we help you find the right installation pipes and couplings for any type of project. Our product range consists of various installation pipes for both commercial properties as well as private housing. Apart from pipes, we also offer high-quality products within HVAC, such as couplings with clamping rings, t-plus couplings to presystems. Learn more about Ahlsell's range of installation pipes, parts, and accessories here on our online store or visit the nearest Ahlsell shop.

Products (1402)

T-connector 90°, VA 1150 reduced yellow, Vatette

T-connector 90°, VA 1150 reduced yellow, Vatette

Art. no.: 1943653

For copper, steel and PEX pipes. Support sockets must be used for soft and semi-hard copper and steel pipes and PEX pipes. G=cylindrical pipe thread. Smooth ends.

Ball valve 546 with EPDM adhesive sleeve sealing, Georg Fischer

Ball valve 546 with EPDM adhesive sleeve sealing, Georg Fischer

Art. no.: 4527303

Grey-red handle.

Ball valve 546 with EPDM adhesive sleeve sealing, Georg Fischer

Thick-walled, hard copper pipes, length 5.0 m

Thick-walled, hard copper pipes, length 5.0 m

Art. no.: 1752106

Thick-walled copper pipe of 5 m.

Straight coupling external thread PressPex, LK

Straight coupling external thread PressPex, LK

Art. no.: 1872034

Press coupling for joining LK PAL and LK PE-X Universal pipe.

Bend 90° with 2 sockets, stainless steel, Mapress

Bend 90° with 2 sockets, stainless steel, Mapress

Art. no.: 1450208

Pressed with the M-gradients.

Bend 90° with 2 sockets, stainless steel, Mapress

Bend 90° with 2 sockets, stainless steel, Mapress

Plusprisol type copper pipes, single-pipe, heat-insulated, in coils of 25 m

Plusprisol type copper pipes, single-pipe, heat-insulated, in coils of 25 m

Art. no.: 1762152

With insulation of cell polyethylene and annealed outer jacket of PEL.

Stainless steel pipe 316 L 6M, A-press, a-collection

Stainless steel pipe 316 L 6M, A-press, a-collection

Art. no.: 1454553

Stainless steel 316L pipes, unannealed, 6 meter length for a-collection tap water press systems.

Stainless steel pipe 316 L 6M, A-press, a-collection

T-connector 90° VA 1150 yellow, Vatette

T-connector 90° VA 1150 yellow, Vatette

Art. no.: 1942812

For copper, steel and PEX pipes. Support sockets must be used for soft and semi-hard copper and steel pipes and PEX pipes. G=cylindrical pipe thread. Smooth ends.

Hexagonal nipple, external thread

Hexagonal nipple, external thread

Art. no.: 1985233

Made of degalvinisation-resistant material.

T-connector 90°, pressure pipe fittings PVC for adhesive bonding

T-connector 90°, pressure pipe fittings PVC for adhesive bonding

Art. no.: 2264018

Thin-walled, hard copper pipes, length 2.5 m

Thin-walled, hard copper pipes, length 2.5 m

Art. no.: 1752405

Thin-walled copper pipe of 2.5 m.

Thin-walled, hard copper pipes, length 3.0 m

Thin-walled, hard copper pipes, length 3.0 m

Art. no.: 1752512

Copper pipe, thin walled, hard, length 5.0 m

Copper pipe, thin walled, hard, length 5.0 m

Art. no.: 1752113

Thin-walled copper pipe of 5 m.

Stainless steel pipes 1.4401 6M, Mapress

Stainless steel pipes 1.4401 6M, Mapress

Art. no.: 1450200V

Annealed pipes.
The price indicates unit per metre.

Chemical Resistant PVC Pipe, 5 meters, Pressure Class PN10/1.0 MPa

Chemical Resistant PVC Pipe, 5 meters, Pressure Class PN10/1.0 MPa

Art. no.: 2252531

Standard design: According to SS 1776, of rigid PVC, without collars intended for glueing. Supplied in lengths of 5 m. Colour: grey.
Pressure class: PN = max working pressure in MPa at +20°C water and air. PN10 = 1.0 MPa. Regarding other media and temperatures, refer to DIN 16929 and ISO/TR 7473

Chemical Resistant PVC Pipe, 5 meters, Pressure Class PN10/1.0 MPa

Socket, PVC Pressure Parts for Gluing

Socket, PVC Pressure Parts for Gluing

Art. no.: 2267086

Groove board Heat Floor 22, for floor joists, LK

Groove board Heat Floor 22, for floor joists, LK

Art. no.: 2418902

Flooring grade chipboard, 22 mm, with tongue on all four sides. The board has 3 grooves c/c 200 mm for LK Universal pipe 16 mm. Available in two quality classes, standard V20 and moisture resistant V313. The slotted board must be complemented with LK Heat distribution plate 16/190, RSK 241 80 09. Build height incl. pipe 22 mm.

Ballofix Ball Valves, Chrome-Plated with Handle, Model 507, Compression x Compression with Handle

Ballofix Ball Valves, Chrome-Plated with Handle, Model 507, Compression x Compression with Handle

Art. no.: 8540700

For tap water/heat/cold

Angle 90°, pressure pipe fittings PVC for bonding

Angle 90°, pressure pipe fittings PVC for bonding

Art. no.: 2262012

Sleeve, adhesive smooth end - external thread, pressure pipe parts PVC for gluing

Sleeve, adhesive smooth end - external thread, pressure pipe parts PVC for gluing

Art. no.: 2267716

For glue joints.

Sleeve, adhesive smooth end - external thread, pressure pipe parts PVC for gluing

Hexagonal nipple, external thread, reduced

Hexagonal nipple, external thread, reduced

Art. no.: 1985472

Made of degalvinisation-resistant material.

Hose nipple with external thread brass

Hose nipple with external thread brass

Art. no.: 2174150

External thread

Hose nipple with external thread brass

Hose nipple with external thread brass

Hose nipple with external thread brass

Hose nipple with external thread brass

Hose nipple with external thread brass

PVC coupling for gluing EPDM, Georg Fischer

PVC coupling for gluing EPDM, Georg Fischer

Art. no.: 2271070

With rubber ring made of EPDM. If Viton rubber is required, order this separately – see accessories.

Ball valve 542 with EPDM adhesive sleeve sealing, Georg Fischer

Ball valve 542 with EPDM adhesive sleeve sealing, Georg Fischer

Art. no.: 5494499

Ball valve 542 with EPDM adhesive sleeve sealing, Georg Fischer

PressPex Calibration Tool F9, LK

PressPex Calibration Tool F9, LK

Art. no.: 1881522

For simultaneous chamfering and calibration of pipe ends. PLEASE NOTE! Chamfering is necessary to ensure that the PressPex connector’s O-ring is not damaged when the pipe is inserted. The calibration tools work well for manual operation as well as in a power drill. When using a drill machine, the speed may not exceed 500 rpm.

Fitting with external and internal thread

Fitting with external and internal thread

Art. no.: 1986025

Made of degalvinisation-resistant material.

Fitting with external and internal thread

Actuator motor 3-point, Purmo

Actuator motor 3-point, Purmo

Art. no.: 2973190

Electric motor for control of two- or three-way valve. The motor can be connected to an external regulator (at the heat source) for separate outdoor compensation of the underfloor heating system. Choice of actuator (230 V, 24 V or 0-10 V) depends on the controller's control signal.

Actuator motor 3-point, Purmo

Nipple, Internal and External Thread ("joker nipple"), Reduced

Nipple, Internal and External Thread ("joker nipple"), Reduced

Art. no.: 1987072

Made of degalvinisation-resistant material.

Nipple, Internal and External Thread ("joker nipple"), Reduced

Controller Vario Universal controller, Uponor

Controller Vario Universal controller, Uponor

Art. no.: 2973126

Uponor Vario Universal controller with adapters.
Used to be able to connect Uponor Smatrix to floor heating distributors of other brands than Uponor. Fits the most common floor heating benefits on the market. Also used for Uponor Vario B distributor (WGF).
The set contains: 1 controller, 1W IP54 and 4 adapter rings (VA16H, VA26, VA32, VA50)

Controller Vario Universal controller, Uponor

Room thermostat S2, LK

Room thermostat S2, LK

Art. no.: 2434399

Electronic, soundless room thermostat with Triac outlet and electronic feedback. Available in models S2 and S2 EXT with S2 EXT having optional connection compatibility with LK External Sensors, ICS/S2 to control floor temperature. The thermostat is mounted against the device box or directly over the cables where they come out of wall via an electric conduit. Use the enclosed cover frame when installing the device box.

Special steel pipes electro-galvanized 6M, Mapress

Special steel pipes electro-galvanized 6M, Mapress

Art. no.: 1550848

Length 6 meters. The price indicates unit per meter.
Max pressure 16 Bar. Max media temperature (continuous) + 120gr. My media temperature (continuous) -30gr.

O-rings Viton, A-Press, a-collection

O-rings Viton, A-Press, a-collection

Art. no.: 1769589

O-ring type V in high-quality FKM Viton®. Suitable for hydraulic oils, fuels, especially in compressed air where oil mist occurs. FPM. Color green. Temperature range -30°C max +200°C continuous, max briefly +250°C. Resistant to mineral and synthetic oils, fuels, additives, acids, aliphatic and aromatic hydrocarbons. Excellent resistance to high temperatures. High tolerance to weather influences, ozone, and UV. If uncertain about resistance, contact your Ahlsell sales representative.

O-rings Viton, A-Press, a-collection

Hexagonal nipple, external thread, pressure pipe parts for PVC thread

Hexagonal nipple, external thread, pressure pipe parts for PVC thread

Art. no.: 2277028

Max operating pressure 1.0 MPa.

Transition coupling/female thread Megapress, Viega

Transition coupling/female thread Megapress, Viega

Art. no.: 1546684

The Megapress system is intended for installations of heating, sprinkler, cooling, and industrial applications together with steel pipes according to DIN EN 10255 and DIN EN 10220. The Megapress fittings are made of non-alloy steel, material 1.0308, with a zinc-nickel coating of 3-5 microns. Megapress is not intended for drinking water installations and gases according to DVGW G 250. Leakage indicator SC-Contur.

Transition coupling/female thread Megapress, Viega

Transition coupling/female thread Megapress, Viega

Transition coupling/female thread Megapress, Viega

Transition coupling/female thread Megapress, Viega

Transition coupling/female thread Megapress, Viega

Coupling, adhesive sleeve - internal thread, PVC pressure parts for gluing

Coupling, adhesive sleeve - internal thread, PVC pressure parts for gluing

Art. no.: 2271435

With rubber gasket made of EPDM. If Viton rubber is required, order this separately – see accessories.

Metal cleaning plug

Metal cleaning plug

Art. no.: 8070039

Made of degalvinisation-resistant material.

Nipple, Internal and External Thread ("joker nipple"), Reduced and Chrome-Plated

Nipple, Internal and External Thread ("joker nipple"), Reduced and Chrome-Plated

Art. no.: 1987825

Made of degalvinisation-resistant material.

Shunt and underfloor heating benefits in cabinets, Purmo

Shunt and underfloor heating benefits in cabinets, Purmo

Art. no.: 2986219

Cabinet for safe and hidden installation of Purmo floor heating distributor with shunt. Supplied with fitted shunt and floor heating distributor. Primary connection for the shunt is G20. Clamping couplings for Purmo PE-RT 16 mm pipes. Integrated flow meters and thermostatic valves. The cabinet frame is made of powder-coated sheet steel, color RAL 9016. Leakage indication is achieved by mounting gossip tubes under the cabinet with accompanying mounting details. Cover washer for the outlet of the gossip pipe is included. The cabinet is adapted for installation in a wall, but can be mounted on the outside with the help of a cover. The cabinet frame is prepared for use with a stand. Supplied with fitted pipe bushings. Cover plates made of transparent plastic are available as accessories.

Shunt and underfloor heating benefits in cabinets, Purmo

Shunt and underfloor heating benefits in cabinets, Purmo

Shunt and underfloor heating benefits in cabinets, Purmo

Shunt and underfloor heating benefits in cabinets, Purmo

Shunt and underfloor heating benefits in cabinets, Purmo

Reduction set VA 1215, Vatette

Reduction set VA 1215, Vatette

Art. no.: 1934337

For copper, steel and PEX pipes. Support sockets must be used for soft and semi-hard copper and steel pipes and PEX pipes. G=cylindrical pipe thread. *) = Nickle plated.

Reduction set VA 1215, Vatette

Reduction set VA 1215, Vatette

Bend 90° with 2 sockets Type V, a-collection

Bend 90° with 2 sockets Type V, a-collection

Art. no.: 1767624

Bend 90° in copper alloy, with leakage indicator (LBP) in unpressed condition, O-ring in EPDM not resistant to oils and mineral greases, pressed with V-jaws.
The press parts are intended for use with copper pipes according to EN1057.
The product has RISE type approval SC0142-18, STF EUFI290003572-TH1.

Bend 90° with 2 sockets Type V, a-collection

Angle coupling 90° VA 1147, Vatette

Angle coupling 90° VA 1147, Vatette

Art. no.: 1940424

For copper, steel and PEX pipes. Support sockets must be used for soft and semi-hard copper and steel pipes and PEX pipes. G=cylindrical pipe thread. Smooth end x internal thread.

Combi Pipe RIR with insulation black/grey, Uponor

Combi Pipe RIR with insulation black/grey, Uponor

Art. no.: 2005052

Uponor-combi PEX-pipe for both potable water and radiator systems with a white protective pipe with blue and red bands.

Straight coupling VA 1136, Vatette

Straight coupling VA 1136, Vatette

Art. no.: 1940528

For copper, steel and PEX pipes. Support sockets must be used for soft and semi-hard copper and steel pipes and PEX pipes. G=cylindrical pipe thread. Smooth end x external thread.

Straight coupling VA 1136, Vatette

T-connector KRK, yellow, external thread, Ezze

T-connector KRK, yellow, external thread, Ezze

Art. no.: 1885326

Made with standard pipe threads in the coupling nut and in each pipe section. The coupling nut has a sealing ring of fibre or annealed copper inserted and the pipe section’s threaded end is turned flat for sealing against the ring. G=cylindrical pipe thread.

T-pipe with reduced branch Type V copper, a-collection

T-pipe with reduced branch Type V copper, a-collection

Art. no.: 1767695

T-piece with reduced branch in copper alloy, with leak indicator (LBP) in unpressed condition, O-ring in EPDM not resistant to oils and mineral greases, pressed with V-jaws.
The press parts are intended for use with copper pipes according to EN1057.
The product has RISE type approval SC0142-18, STF EUFI290003572-TH1.

Ballofix Ball Valves, Chrome-Plated with Handle, Model 503, Internal/External Thread

Ballofix Ball Valves, Chrome-Plated with Handle, Model 503, Internal/External Thread

Art. no.: 8540304

For tap water/heat/cold

Straight coupling cu x internal thread

Straight coupling cu x internal thread

Art. no.: 1980861

Made of degalvinisation-resistant material.

T-connector, internal thread in all branches, chrome-plated

T-connector, internal thread in all branches, chrome-plated

Art. no.: 1984244

Made of degalvinisation-resistant material.

Reduction, glue smooth end, pressure pipe parts PVC for gluing

Reduction, glue smooth end, pressure pipe parts PVC for gluing

Art. no.: 2268150

Glued smooth end combined with clamp sleeve.

Reduction, glue smooth end, pressure pipe parts PVC for gluing

Actuator adapter VA, LK

Actuator adapter VA, LK

Art. no.: 2434615

Capillary Bend 90°, for soldering, internal soldering

Capillary Bend 90°, for soldering, internal soldering

Art. no.: 2000222

Aviator UNI, LK

Aviator UNI, LK

Art. no.: 4814402

Showing 52 of 1402