Ahlsell – We make it easier to be professional
Order lines: 0
Quick order
AhlsellProductsElectricEnergy storage systems

Energy storage systems

Complete sets
BMS
Battery modules
Accessories

Ahlsell's wide range of electricity includes luminaires, LEDs, light sources, cables, electrical network equipment, installation equipment, switchboards, fuses, appliance cabinets, busbar distribution, automation, tools, measuring instruments, telecommunications, data, security, lighting, heating products, fans, and heated towel rails. We have everything within electricity for professionals working with electricity, including electricians, electrical installers, property managers, automation technicians, and many more. Explore our wide range of products here or visit your nearest Ahlsell store.

Products (51)
Battery Module H3
Pylontech
Battery Module H3
Art. no.: 2742064
Battery modules from Pylontech's Force H3 series of 5.12kWh with a working temperature between -10 and +55 (IP55). Designed for over 8000 full cycles (equivalent to 22 years of daily use 100%-10%-100%) and more than 15 years of operation (@25℃).

IP55 class means that the battery can withstand dust, dirt and some water splashes or rain. Suitable under a roof, in a carport, against a house wall with protection, or in a ventilated cabinet. May be okay in mild climates without extreme temperature changes.

When installed in a Ferroamp system, there is a maximum of 6 modules per stack (30.72 kWh) and 6 stacks in parallel against an ESO (184kWh). Then several ESOs can be connected in parallel, even with different batteries and brands, in the Ferroamp system to even larger battery systems.
ESO module ESS, bi-directional DC / DC converter
Ferroamp
ESO module ESS, bi-directional DC / DC converter
Art. no.: 2740259
A bi-directional DC/DC converter rated up to 6 kW that controls the current and handles the communication between ferroamp supported batteries and the EnergyHub system.

SPECIAL TERMS FOR THE ESS SYSTEM
Ferroamp's ESS system consists of five modules: (i) ESO Module, (ii) ESS Power Case, (iii) ESS Main Controller Module, (iv) ESS Battery Module 3.55 kWh and (v) ESS Battery Brackets. For this warranty to apply to the ESS system and its modules, all modules in the system must have previously been delivered by Ferroamp. For ESS systems and modules not previously supplied by Ferroamp, as well as for modules included in ESS systems containing modules not previously supplied by Ferroamp, this warranty does not apply.
Battery module 3.55 kWh ESS
Pylontech
Battery module 3.55 kWh ESS
Art. no.: 2740261
A high voltage, 96V, 3.55 kWh battery module that is part of Pylontech's Force H2 system.

A complete ESS system consists of the following items:
- 2740258 Distribution box ESS (1 pc)
- 2740259 ESO module ESS (minimum 1 pc)
- 2740837 Battery control unit ESS (1 pc)
- 2740261 Battery module 3.55kWh ESS (minimum 2 pcs.)

ESS SYSTEM WARRANTY TERMS
Ferroamp's ESS system consists of four modules: (i) ESO Module, (ii) ESS Power Case, (iii) ESS Main Controller Module, and (iv) ESS Battery Module 3.55 kWh. For Ferroamp's warranty to apply to the ESS system and its modules, all modules in the system must have previously been delivered by Ferroamp. For ESS systems and modules not previously supplied by Ferroamp, as well as for modules included in ESS systems containing modules not previously supplied by Ferroamp, this warranty does not apply.
BT-mesh Relay node 230VAC 16A
Enequi
BT-mesh Relay node 230VAC 16A
Art. no.: 1360777
Bluetooth mesh relay which, with its small format, allows it to easily fit in a wall box or centrally on a DIN rail with our accessory (QPN-MB holder for DIN rail E1360778). Program and build a larger system using our app (QuiPower app) which can be downloaded for free from Google Play or the App Store. Many smart functions are available such as control with Astro functions (sun up/down), scenarios, weekly controls and timers. Create your favorite functions and program them to optional buttons in the system that can be controlled with up to 5 clicks per button. This means that each QPN-R1 with its push button can control up to five functions, and if the system is set up correctly, the app is not needed for a good continued user experience.
EMS Core energy management system
Enequi
EMS Core energy management system
Art. no.: 2760100
Core powered by QuiPower creates simple and profitable energy optimization in every property. Core is easily installed via Enequi's Quick Start Guide in 3 steps. Enequi's QuiPower-EMS makes advanced energy optimization a breeze regardless of property type. The product is compatible with a wide range of inverters and can also control heat pumps and electric car chargers (visit enequi.com for the latest compatibility list).

Core is the brain that delivers reduced electricity bills by controlling, analyzing and controlling the property's electricity use and production based on prevailing conditions and needs. The product is mounted on the wall and connected to both hybrid inverters and energy storage to intelligently regulate the energy flows to and from them. Core also connects to the property's network, which enables real-time visualization of savings and energy flows in the QuiPower app (iOS and Android).

Core predicts the property's energy use today and tomorrow and, among other things, reduces power peaks, takes into account electricity grid tariffs, optimizes electricity prices, controls electric car charging, balances phases and enables control of heavy loads in the building – all via intelligent, automatic AI control.
Optimizer EMMA A02
Huawei
Optimizer EMMA A02
Art. no.: 9815753
EMMA A02 Energy Management Assistance - Optimized home energy scheduling. Can be connected to loads, such as electric car chargers, heat pumps that are SG Ready (SG Ready - Smart Grid Ready) and smart switches. Built-in WLAN/FE module - for easy commissioning.

Intelligent energy management:
Optimizes the scheduling of PV and ESS systems based on forecast. Reads energy generation and consumption in real time while communicating between devices and solar energy systems.

Store excess current:
Based on your tailored power limit when feeding into the grid, EMMA will forecast your excess and command storage, giving you an energy backup.

Maximize green energy consumption:
A wide range of household appliances can be connected to EMMA and, via the FusionSolar app, set to operate at specified times, either through TOU mode or PV preferred mode. With enough solar energy, charging priority can be given to some of the active devices. In case of overload, EMMA will switch off less demanding devices and ensure a stable power supply in the home.
Battery module SunESS H
Samvolt
Battery module SunESS H
Art. no.: 9815373
SunESS H is a modular, high-voltage battery developed to meet the toughest demands in energy storage. From smaller private homes to condominiums as well as industrial and commercial applications. With advanced lithium iron phosphate (LFP) technology, SunESS H offers high safety, long life and maximum efficiency. Each system is scalable from 5 kWh up to 60 kWh per battery input and thanks to the smart BMS system and compatibility with hybrid inverters from Solinteg, it is a future-proof investment regardless of project size.

Swedish support – via Samvolt
Long life – 6,000 cycles with 70% EOL
Safe LFP chemistry – thermally stable, maintenance-free and certified
DC/DC optimization – modular and expandable without losses
Works with support services

SunESS H is not just a battery – it is a key component of the sustainable energy system, designed to maximize self-sufficiency, reduce power peaks and create new revenue streams. Requires a Samvolt x Sunwoda Control Module SunESS H for support with external inverters such as Solinteg. For systems with All-in-one inverters from Samvolt x Sunwoda, a control module is not required for the first 4 modules.
Backup UPS EmergencyPower 1P
Ferroamp
Backup UPS EmergencyPower 1P
Art. no.: 2742066
Backup solution (UPS) that provides 10A (20A for 5 seconds) on one phase (2.3kW) for Ferroamp systems with an EnergyHub. Unique solution with integrated earth leakage circuit breaker and measuring earth for easier and cheaper installation (regular earth can also be used if necessary). Ferroamp EmergencyPower is safer than other solutions as it breaks already at 50V, and also for the electricity companies as it does not have support for outputting to the electricity grid but can only supply the property with power from solar cells and battery.

Partly supplied via permanently installed loads but also a schuko socket for temporary loads.

In the absence of the electricity grid for a longer period when the battery has been discharged during the night, the system can be started ("blackstart" button) in the morning when the solar panels start producing, and again charge the batteries on overproduction.
New in the online store
Core EMS 2nd generation
Enequi
Core EMS 2nd generation
Art. no.: 2760300
ENEQUI Core 2nd Generation is a Swedish-developed energy management solution that helps homeowners and other properties lower their electricity bills by collecting relevant energy data that is analyzed and used to control energy flows more efficiently – automatically and in real time based on the property's needs.

ENEQUI Core is easily connected to your existing energy system and has broad compatibility with, among other things, market-leading inverters, electric cars, electric car chargers and can also control heat pumps (visit enequi.com for the latest compatibility list). The software, our EMS (Energy Management System), in ENEQUI Core acts as the “brain" of the system and continuously selects the measures that provide the most benefit and profitability for the property, for example:

• Reduce expensive power peaks by smoothing the load
• Optimize the use of solar cells and battery storage so that more of your own electricity is used in the home
• Shift consumption and charging to hours with lower electricity prices
• Control electric car charging based on when the car needs to be ready
• Enabling revenue through flexibility and support services

In the QuiPower app you get a clear overview of energy consumption, solar production, battery status, electric car charging and follow-up of savings and potential revenue. You can also follow spot prices, property consumption and see a forecast for the next 24 hours.

Please note that an active Smart Saver subscription is required for functionality. The subscription is registered by the end user in the QuiPower App.
Showing 51 of 51