AhlsellProductsElectricConsumer goods 90-98

Consumer goods 90-98

Are you going to install consumer goods such as towel dryers, fan systems, or white goods at your customer's place? Ahlsell helps you find the right products for your job. Regardless of whether you work with home installation full-time or in partial projects, we have the range for your needs. Here you will find products for ventilation, sauna, steam, garden, and SPA. We cover the need for your installation job with consumer goods such as heating products from bathroom towel rails to gas stoves and infrared heating. Ahlsell stocks products from most major suppliers. Explore our wide range of products for home installation of the consumer market here in the online store or visit your nearest Ahlsell store.

Products (236)
Fresh Air Vent Fresh TL80DE dBs NEW
Fresh
Fresh Air Vent Fresh TL80DE dBs NEW
Art. no.: 9302640
Wall vent with a very discreet design. The front can be wallpapered and painted over. The vent is equipped with strong condensation insulation, over-ventilation protection, storm protection, and a filter. The storm protection prevents energy loss due to wind impact. The flow is regulated with the front, which has a mechanism for changing the opening angle. The front opens at the top and directs the air upwards, providing a comfortable distribution pattern even with underfloor heating.

Sound-reducing: The sound-absorbing wall duct consists of a sound-absorbing pipe instead of a standard wall pipe. The sound-absorbing pipe is easy to cut to the correct length with a utility knife. Standard pipe length is 360 mm.

Internal vent part: The internal vent part has strong condensation insulation, a filter, and a front that tilts up at the top to adjust the flow. The filter is mounted in a filter cassette, which is also equipped with protection against any incoming water. The front has four opening positions to vary the flow. The distribution pattern is carefully developed to suit underfloor heating systems; the vent directs the air upwards and to the sides. The mixing of room air is very efficient; just a few decimeters from the unit, the strongly cooled air has reached a comfortable temperature.

Installation/placement: The vent should be placed high up on the wall; if there is a radiator, it should ideally be placed above it. This placement utilizes the convection current and achieves the best comfort. The vent is excellent for use with underfloor heating as it is designed for this purpose.

Handling/maintenance: To ensure good air quality and maintained flow, the filter should be cleaned/replaced 1-2 times a year. The standard filter is washable; use a mild soap solution. Pollen and environmental filters should be replaced with new ones. The filter is mounted in a filter cassette behind the front, which is easily removed by releasing the front from the lower attachments and then lifting it up. The filter cassette is pulled straight out from the vent chassis.

Accessories: A complete accessory series is available for the vent for additional flexibility.

Replaces 9302573 (629087)
Fresh Air Vent Fresh TL100DE T NEW
Fresh
Fresh Air Vent Fresh TL100DE T NEW
Art. no.: 9302642
Fresh fresh air vents are installed in bedrooms and living rooms. A rule of thumb for the correct number of vents is one in each bedroom and two in the living room. In some cases, it is wise to increase the number of vents if multiple people sleep in the same room or if the total living area is larger than usual. The Fresh TL DE series are sleek wall vents. TL DE comes standard with condensation protection, storm protection, and is also paintable. The vent has a telescopic function of 185-340mm; for thicker walls, extend with modular pipes. Installation/Placement The vent is placed high up on the wall, approximately 220 cm from the floor or with the top edge of the vent at least 10 cm from the ceiling.

The vent is excellent for use with underfloor heating. In this case, place the vent at least one meter from the window to prevent cold drafts due to cold radiation through the window. The vent should be placed directly above the heating element. This utilizes the rising heat from the radiator, known as convection current. Comfortable air distribution The air distribution is carefully developed; the vent releases air upwards and to the sides.

The outside air mixes very effectively with the room air, and just a few decimeters from the vent, the incoming air has reached a comfortable temperature. Storm protection saves energy Regardless of the weather, the storm protection slows down high airflows, which contributes to lower heating costs compared to a traditional vent. The storm protection provides good comfort in the room and reduces the risk of drafts.

Filter and maintenance Maintain good indoor air quality by regularly changing and maintaining your filters. To ensure good air quality and maintain flow, the filter should be cleaned or replaced one to two times per year. The standard filter is washable; use a mild soap solution. The pollen filter and electrostatic filter should be replaced with new ones. The filter is mounted in a filter holder behind the front. The front can be easily folded up for access to the filter holder. When using the electrostatic filter, the filter holder is replaced and cannot be combined with storm protection.
Replaces 9302600 (629700)
Fresh Air Vent Fresh TL100DE T NEW
The Sense Pure 6 sauna heater
Tylö
The Sense Pure 6 sauna heater
Art. no.: 9301278
The electric sauna heater Sense Pure 6 is adapted to a sauna volume between 4-8m3 and for home use. The heater can be placed on the floor or on the wall. When placing on the floor, you supplement with legs. The control panel Pure is included. The surface of the heater is touch-safe with Thermo safe protection. Supplemented with 20kg sauna stone for wall-mounted units Placement of the control panel outside the sauna room is recommended if possible due to lower ambient temperature.

The control panel is permitted to be placed inside a Tylöhelo sauna room or a self-built sauna room whose ventilation is carried out and works according to Tylöhelo's advocated ventilation (natural draft principle). Read the sections on the location of the inlet air valve and the outlet air valve in the accompanying instructions. Control panel must always be placed outside the sauna room unless these requirements are met. Important! Ambient temperature for control panel must never exceed 80 ° C.
Input air pack Pax wall vents 80 and 100
Pax
Input air pack Pax wall vents 80 and 100
Art. no.: 9302455
Manual or automatic thermostat-controlled outdoor air device for the direct intake of outdoor air. The device is intended for almost all types of rooms with natural ventilation or fan controlled exhaust air ventilation It reduces the risk of draft and prevents severe cooling and freezing damage in cold weather.
Thermo cassette E9302474 is used for upgrading from manual to Thermostat-controlled wall vent.

Manual version:
The device is variably controlled by a lever with distinct positions for open vent and closed vent.

Automatic version:
The device automatically controls the intake air according to variations in the outside temperature. The thermostat’s sensor body sets the shutter in the vent. At -5°C the damper is completely closed and at +10°C completely open.
Available in versions with a round or square cover.

R = Round cover
M = Manual function
T = Thermostat-controlled function
P = Package containing vent, wall pipe and outer wall grille.

Wall hole-cutting measurements: PAX Air supply package 100 = Ø 110 mm/PAX Air supply package 80 = Ø 95 mm.
Max wall thickness for PAX Air supply package 80/100 = 370 mm.
Cooker hood 622-10, 49cm, Franke
Franke
Cooker hood 622-10, 49cm, Franke
Art. no.: 9001112
The discreet and stylish cooker hood for installation in a cupboard or in a cupboard for those who live in an apartment with a central fan. Electronic damper that is timer controlled effectively keeps the food set away and the fine LED lighting provides a good working light. Everything is regulated via the electronic control at the bottom of the product. The metal wire filters can be easily removed and washed by hand or in a machine. The cooker hood does not have its own built-in motor but is intended to be connected to a ventilation system. Cooker hood apartment -10 These products are only equipped with dampers with which you can increase or decrease the air flow depending on whether the damper is open or closed. The damper also enables adjustment of base and forcing flow. These products have no ability to control any unit. The damper is timer controlled, max 60 min. Installation dimensions 450x287mm.
Cooker hood 622-10, 49cm, Franke
Showing 52 of 236