Phoenix Contact
Throughput terminal PTArt. no.: 2912701
Due to their construction, type PT spring terminals give a fast connection of stiff wires without compromising important qualities. Integrated buttons make the opening of the spring very simple, for example when a wire must be disconnected. Stranded and solid wires (e.g. FK and EK) are simply pushed into the connection after installation is removed without any need for tools. Wires with and sleeves are not a problem, the “Push-in" function works down to 0.34 mm2. Multi-strand cables (e.g. RK and MK) can be connected by first opening the spring with the integrated button. Two bridge shafts for “plug-in" bridges give optimal potential distribution. Up to three label positions to facilitate easy identification of each connection.
Push-In sprung plinth types. PT is included in the CLIPLINE complete series, facilitating combination of different blocks in the same series.
Technical data
In accordance with: IEC 947-7-1 and -2
Insulation material: Polyamide 6.6
Inflammability class according to UL 94: V0
Test outlet in bridge shaft 2.3 mm
Marking, see ZBFM for outer signage tracks, ZB for signage tracks in the middle of the block.
Mounting on 35 mm rail
Sprung- through blocks PT (2 wire connections)
Colour: grey and blue (BU), and washers see accessories
Protective line terminals (-PE) Colour: green/yellow
