Feedback
Beulco
Jet pump for salty and chlorinated water, Beulco
JET COM SP 102M JET PUMP, BEULCO
Article number: Suppl. article no:
5950660
0638086000
to see price and stock
Self-priming Jet-pump 1-phase.
Technopolymer material for saturated and chlorinated water.
Technopolymer material for saturated and chlorinated water.
- Article number: 5950660
- Suppl. article no: 0638086000
- Ean no: 7331807054778
- Material class PHE100
Technical data
- Insulation class according to IEC: F
- Nominal current: 5.1 A
- Connection inlet side: Internal thread cylindrical BSPP-G (ISO 228-1)
- Connection outlet side: Internal thread cylindrical BSPP-G (ISO 228-1)
- Nominal diameter connection inlet side: DN 25
- Nominal diameter connection outlet side: DN 25
- Number of phases: 1
- Motor power output (P2) per motor: 0.75 kW
- Frequency: 50 Hz
- Type of drive: Electrical
- Degree of protection (IP): IP44
- Material impeller/pump wheel: Other
- Material pump casing: Other
- Material quality impeller/pump wheel: Other
- Max. operating pressure: 6 bar
- Max. discharge flow: 3.6 m³/h
- Max. static height: 53 m
- Pump length: 425 mm
- Medium temperature (continuous): 0-35 °C
- Rated voltage: 1-230 V
- Ambient temperature: 0-40 °C
- Material quality pump casing: Other
- Forced motor cooling: No
- Electrical connection: Connection cable with plug
- Interface Pulse Width Modulation (PWM): No
- Interface pulse counter: No
- Interface signal 0-10 V / 2-10 V: No
- Interface signal 0-20 mA / 4-20 mA: No
- Communication: None
- With communication interface RS-232: No
- With communication interface RS-485: No
- Volume flow rate (BEP): 3.6 m³/h
- Potential free switch contact: No
- Interface PT100 / PT1000 / PTC: No
- Mobile communication standard 5G: No
- Radio standard WLAN 802.11: No
- Supporting protocol for BACnet IP: No
- Supporting protocol for BACnet MS/TP: No
- Supporting protocol for CAN/CANOpen: No
- Supporting protocol for EtherNet/IP: No
- Radio standard Bluetooth: No
- Supporting protocol for KNX: No
- Supporting protocol for LIN Bus: No
- Supporting protocol for LON/LONWorks: No
- Supporting protocol for Modbus RTU: No
- Supporting protocol for Modbus TCP: No
- Supporting protocol for PROFIBUS: No
- Supporting protocol for PROFINET IO: No
- Discharge head at flow rate (BEP): 530 kPa
- Flange compression stage connection inlet side: PN 9
- Height of suction end: 144 mm
- Outer pipe diameter connection inlet side: 25 mm
- Outer pipe diameter connection outlet side: 25 mm
- Cable length: 2 m
- Mobile communications standard 2G (GSM): No
- Mobile communication standard 4G (LTE): No
- REACH Date: 2025-03-27
- REACH Information obligation: No