Feedback
Grundfos
Hot water circulation pump UPS-N, Grundfos
UPS25-40 N 180 GRUNDFOS 1X230V 50Hz 9H
Article number: Suppl. article no:
5803098
96913060
to see price and stock
The pump is of the canned type rotor, i.e. the pump and the rotor make up an integrated unit without shaft seals and with only two gaskets for enclosing.
- Article number: 5803098
- Suppl. article no: 96913060
- Ean no: 5700313543083
- Material class PHH120
Technical data
- Packagin Size: 1 ST/198 ST
- Pump type: UPS 25-40N
- Built-in length: 180 mm
- Nominal diameter connection inlet side: 1 1/2 inch (40)
- Nominal diameter connection outlet side: 1 1/2 inch (40)
- Insulation class according to IEC: F
- Degree of protection (IP): IP44
- Frequency: 50 Hz
- Motor speed control: None
- Motor power input (P1) per motor: 0.045 kW
- Nominal current: 0.2 A
- Electrical connection: Terminals
- Double pump: No
- Rotational speed: 2583 Rpm
- Connection inlet side: External thread cylindrical BSPP-G (ISO 228-1)
- Connection outlet side: External thread cylindrical BSPP-G (ISO 228-1)
- Material quality impeller/pump wheel: Other
- Material impeller/pump wheel: Other
- Connection standard inlet side: ISO 228-1
- Connection standard outlet side: ISO 228-1
- Number of phases: 1
- Interface PT100 / PT1000 / PTC: No
- Interface Pulse Width Modulation (PWM): No
- Interface pulse counter: No
- Interface signal 0-10 V / 2-10 V: No
- Interface signal 0-20 mA / 4-20 mA: No
- Communication: None
- Material pump casing: Stainless steel
- Material quality pump casing: Stainless steel 304 (1.4308)
- Max. operating pressure: 10 bar
- Max. discharge flow: 1.67 m³/h
- Max. static height: 4 m
- With communication interface RS-232: No
- With communication interface RS-485: No
- Medium temperature (continuous): 2-110 °C
- Rated voltage: 230 V
- Volume flow rate (BEP): 1.67 m³/h
- Ambient temperature: 0-40 °C
- Potential free switch contact: No
- Mobile communication standard 5G: No
- Radio standard WLAN 802.11: No
- Supporting protocol for BACnet IP: No
- Supporting protocol for BACnet MS/TP: No
- Supporting protocol for CAN/CANOpen: No
- Supporting protocol for EtherNet/IP: No
- Supporting protocol for KNX: No
- Supporting protocol for LIN Bus: No
- Supporting protocol for LON/LONWorks: No
- Supporting protocol for Modbus RTU: No
- Supporting protocol for Modbus TCP: No
- Supporting protocol for PROFINET IO: No
- Discharge head at flow rate (BEP): 19.9 kPa
- Flange compression stage connection inlet side: PN 10
- Flange compression stage connection outlet side: PN 10
- Radio standard Bluetooth: No
- Supporting protocol for PROFIBUS: No
- REACH Date: 2025-02-11
- REACH Information obligation: No