Ironside

Blow or suck away dirt and dust easily and smoothly with an airflow of up to 117,000 RPM, equivalent to 27.5 m/s. Weighs only 300g and is smaller than a smartphone. Increase the airflow with the turbo button.
Powerful airflow: Up to 117,000 RPM and wind speeds over 27.5 m/s. Easy control with integrated design for smooth transition between power modes.
Turbo boost: Instant increase in airflow by 30% by pressing the turbo button. Perfect for quick inflation and pressurization.
Ideal for outdoor activities and various tasks such as inflating/deflating air cushions, dust blowing, snow blowing, car cleaning, quick drying, and workshop cleaning. Equipped with 3 types of inflation heads for different needs.

Material: Aluminum alloy/PC+ABS
Battery capacity: 110mAh
Charging time: Approximately 2 hours and 15 minutes
Max. operating time: Approximately 3 hours and 30 minutes
Max. speed: 117,000±10% rpm

Focusable headlamp with an adjustable lamp head.
A motion sensor activated via a sensor button allows the headlamp to be switched on or off with a hand movement in front of the lamp — perfect, for example, when working with gloves.
Three light modes plus red light. Maximum 660 lumens.
The light is focused using the lens ring.
Switch‑off with a single button press regardless of light mode (after being active for more than 5 seconds).
Compatible with standard AAA batteries (not included).
LED indicator: red light/charging, green light/fully charged.

Delivered with a removable elastic headband, helmet mount, 3M Dual‑Lock hook‑and‑loop fastener, rechargeable battery, and USB‑C cable.

Lamp head colour: Dark grey metallic
Light source: Gen 2 high‑power white LED with focus control
Rechargeable battery (included): 1× 3.7V 1000mAh Li‑polymer
Runtime: 660 lm / 3 h, 325 lm / 7.5 h, 25 lm / 29 h, Red LED 5 lm / 25 h
Beam distance: 660 lm / 179 m, 325 lm / 126 m, 25 lm / 37 m, Red LED / 4 m
Charging time: 2.5 h
Dimensions: 77 × 47 × 49 mm

Digital stainless steel calipers with fine tuning. With depth measurement and points for interior measurement. With locking screw, mm/inch adjustment button, reset button, and shutdown button. LCD display. Resolution 0.01 mm/0.0005". Tolerances according to DIN 862. Jaw length 40 mm. Equipped with data output and calibration certificate, supplied in a case with an SR-44 battery mount, and an additional.

Sturdy aluminium platform and 80 mm deep steps. 3,4, and 5 steps = Bra Arbetsmiljöval, level 2.

10 snap‑off blades with segments in a safety dispenser featuring a sliding mechanism that minimizes the risk of accidents and keeps the blades easily accessible. The blades are made of SK2 carbon steel, giving them sharpness along with good durability and hardness. Heat treatment and corrosion protection ensure long‑lasting sharpness. Suitable for many materials.

Set fo thread tools of high-speed steel, Each thread dimension contains three thread taps of no.1, 2 and 3 and a thread section. Contains dimensions M3, M4, M5, M6 , M8, M10 and M12 and die stock 25X9, T-handle 1 1/2, screwdriver and thread tap holder.

Grease gun powered by a one‑hand pump with a maximum pressure of 690 bar. The handle features an ergonomic pistol grip.
The body is equipped with an impact‑resistant steel housing and a filling valve for bulk grease, making refilling easy. This grease gun is easy to vent and operate.
Simply twist the main unit to instantly release trapped air.
Designed for convenience, it can be used with a 400 g grease cartridge or with 500 cm³ bulk grease. The grease gun is supplied with a 300 mm long flexible hose and coupler

For hard materials. For grinding concrete and stone. The T-segment configuration places more diamond on the working surface. Wet and dry grinding. Suitable for machines with extraction.

Set of 7 chisels. Slim, ergonomically designed soft grip in three-component material with roll stop and model marking on top and suspension hole. The cushioning in the grip provides increased power transmission and reduced strain on the hand and joints. Contents: Tracks 2.5/3.0/4.0/5.5, PH1/PH2, PZ2.

Small and convenient rechargeable angle lamp with a clip and a magnet in the base. The lamp can be used both as a headlamp and as a pocket/work lamp. 4 light functions. Headband with a rubberized interior. Delivered including a rechargeable battery 1x3.6V 850mAh Li-ion and USB type C charging cable. Charging time 2.5 hours. Also compatible with CR123 battery with lower capacity (max 200 lm). Safety feature: Hold the light button for 1 second to turn on the lamp.

Robust, articulated, and bright rechargeable LED lamp with a slim aluminum lamp housing. Aluminum grip equipped with a clip. Base plate with a strong magnet. Adjustable work light in four modes; maximum 160 lm, as well as UV light and top light. LED indicator shows battery level.

Comes with a 1m type C USB charger.

Adjustable lamp head; vertically 180° and horizontally 270°.

COB work light and top light 650K, 80+CRI, and 395nm UV-LED with 630mW.

Operating temperature: -10° - +40°

Work light runtime: 200 lm/16 h, 400 lm/10 h, 800 lm/5 h, 160 lm/3 h

Top light runtime: 120 lm/16 h

Rechargeable built-in battery: 3.65 V 500mAh Li-ion 21700. Charging time: 3 hours.

For UV light, hold the light button for 1.5 seconds in the off position. The UV light automatically turns off after 5 minutes.

Thickness: 300 g/m². Brass eyelets at 0.5 m intervals. Laminated on both sides. Reinforced corners with inserts. The temperature resistance of the PE tarpaulin is −40 °C to +80 °C.

Compact industrial fan for workshops, construction sites, and industrial environments where directed air circulation is required. Equipped with aluminum blades and a direct‑drive motor for reliable and consistent operation during continuous use.
The fan has three speed settings and a rotational speed of up to 1300 rpm, providing an airflow of 519 L/s and an air velocity of 5.5 m/s. Suitable for both ventilation and increased air exchange in warmer working environments.
A 360° tilt function allows precise direction of the airflow as needed. A sound level below 62 dB(A) makes the unit suitable for environments where personnel are present.
Stable construction without wheels, intended for placement directly on the floor or work surface. A 1.8 m power cable provides flexibility during installation.

Deep hole saw model with hard metal teeth. Kits with hole saws Ventilation HM. Size combinations adapted for different installations and work tasks. Supplied in practical aluminium case. Up to 5 times faster than a bimetallic hole saw in all non-alloy, iron and steel materials. Also useful with a centre drill with HM cutter, can also be used in stone/tile material up to a hardness of 6. Hole saw set HM: 86-102-133-168-210 mm hole saws as well as two holders and one extra centre drill.

Nylon abrasive pads for manual cleaning and finishing. Used for polishing and cleaning - can be used for both wet and dry sanding.

Jigsaw blade set containing:
4 pcs 421591 Knitting saw blade Ironside T101DF 100X8X1.5MM BOS
4 pcs 421605 Knitting saw bladeIronside T101BF 100X8X1.5MM BOS
4 pcs 421596 Knitting saw blade Ironside T144DF 100X8X1.3MM BOS
2 pcs 494753 Knitting saw blade Ironside T118A 65X9,6X1,0MM BOS

Adjustable support prop with tiltable pressure plates for tasks such as ceiling installation. Adjustable between 125–290 cm.
The recommended working load is up to a maximum of 40 kg during normal and continuous use. The absolute maximum load the support can handle is 110 kg, but it is not intended for regular use at that weight.
Excellent for installing all types of sheet materials in ceilings. The feed is quick thanks to the pressure handle.
The construction consists of a durable steel tube frame reinforced with plastic‑ and steel‑reinforced support plates, providing long‑lasting stability.
The ergonomic aluminium handle makes handling and adjustment easy and comfortable..

Angled Flap Disc: These abrasive discs feature flaps made from abrasive cloth folded upwards at a 90-degree angle along the base edge. The shape along the edge of the disc allows optimal adjustment of the tool to the workpiece geometry, thereby achieving better grinding effects in hard-to-reach places. Ceramic abrasive grains enable aggressive and high-quality grinding, along with improved dimensional stability and extended tool life. The angled discs of the flap disc also provide optimal grinding for fillet welds and can be adapted to weld geometry. Continuous self-sharpening of the precision-shaped abrasive grains ensures high material removal throughout the grinding process.

High‑quality cutting discs with ceramic grains. Superior cutting speed and service life; self‑sharpening grains maintain high cutting performance throughout the wheel’s lifespan. For all types of cutting with angle grinders. Precision‑shaped abrasive minerals. Faster cutting with lower pressure. Lower operating temperature. The discs are 'iron‑free' with an iron, sulfur, and chlorine content of < 0.1% for cleaner results. Intended for Iron/Steel/Stainless steel. Lowest total cost and highest productivity. Less force required during cutting or grinding. Ceramic grains require powerful tools that can maintain tool speed.

Angled gas torch with three fixed angles, °-45°-90°, for optimal access. Durable design for tougher tasks with a burn time of 45-60 minutes per fill and a flame temperature of 130° for applications such as heat shrinking, soldering, paint removal, etc. Adjustable flame. Magnetic base. Piezo ignition with safety lock. Please note that this item is delivered without gas. It operates on butane and can be refilled with a butane gas bottle like 314698.

Set with 25 drill bits 1–13 × 0.5 mm.
HSS universal drill bits for handheld or stationary drilling. DIN 338. Straight cylindrical shank. Split point for improved centering. TiN‑coated tip. Drilling capacity up to 4× the diameter.
Primarily intended for drilling in steel, cast steel, and cast iron, and secondarily in stainless steel, non‑ferrous metals, and high‑temperature alloys.

This line laser offers exceptional precision and versatility for all your measurement needs. With a range of up to 30 meters without a detector and 60 meters with a detector, you can easily measure distances in various environments. The high accuracy of ±.2 mm/m (±.0002 in/in) ensures accurate results every time.

Self-leveling range: ±3° for easy and quick setup.
Laser line width: 2 mm ±.5 mm at 5 meters (.10" ±.02" at 20’).
Horizontal lines: Bottom line is 14 mm from the floor.
Wavelength: 510-530 nm - Laser class II for safe use.

Powered by 2x18650 batteries or via USB-C charger.
Battery life: Up to 8 hours of continuous operation.
Charging time: Only 3 hours for direct charging.

Operating temperature: -10° C to +40° C.
Storage temperature: -15° C to +50° C.
Water and dust protection: IP54 rated for robust use in various environments.

Dimensions: 106 mm x 106 mm x 70 mm.
Weight (including batteries): 490 g ± 10 g.

Blow or vacuum away dirt and dust easily and efficiently with an airflow of up to 85,000 RPM, corresponding to 92 m/s.

With a 24,000 mAh battery, the fan provides up to 5.5 hours of continuous use.

Multi-functional brush heads for blowing and vacuuming.

Portable design, weighing approximately 1.3 kg and about the size of a water bottle, making it easy to carry.

Made from aircraft‑grade aluminum alloy for long-lasting durability.

Compact and portable, offering dual functions for blowing and vacuuming, making your outdoor activities even more enjoyable! Equipped with 3 types of inflation nozzles, suitable for a wide range of products:
Dust blower
Snow blower
Car cleaning
Quick drying
Workshop cleaning

Specifications:
Material: Aluminum alloy / PC + ABS
Battery capacity: 24,000 mAh
Charging time: Approx. 2 hours
Maximum operating time: Approx. 5 hours 50 minutes
Maximum rotation speed: 85,000 ±10% rpm (reference value) / 92 m/s

Power bit holder with ¼" fitting and quick-release function. Slim head for better access.

Compact and robust range-finder which measures leights up to 40m. Memory function for 20 measurements. Supplied with 3xAAA-batteries.

Crowfoot socket set in chrome vanadium steel with a matte surface finish. Sizes in the set: 10-11-12-13-14-15-16-17-18-19 mm.

Rechargeable LED lamp in black ABS plastic. Magnetic 360° articulated foot and clips with strong magnet. 2W work light and 1W top lighting. Burning time: 220lm / 2.5h and 80lm / 5.5h respectively. Brightness: Max 220 Lumen, top 80 Lumen. Light source: SMD LED. Charging time: 3h. LED indicator shows charge status. Working temperature: -10 ° - + 40 °. Supplied including fixed rechargeable 3.7V 1100 mAh Li-Ion battery and 1 m micro USB charging cable.

Small and agile indoor laser with a range of up to 15m. Two green laser beams horizontally/vertically. Perfect laser for, for example, tiling. Self-leveling with an accuracy of 0.4mm/m. Powered by 2 AA batteries (included)

The extra thin kerf reduces friction and material removal, resulting in lower energy consumption and less effort. Aggressive tooth angles provide smooth sawing performance. Suitable for cutting all types of wood and wood materials. The blade fits all common cordless battery machines. Significantly reduces noise and heat during operation. Laser-cut material with a flat surface without burrs for precise cuts throughout the life of the blade. 3OC coating for optimal protection against rust and other external influences. Ground arbor hole for optimal spindle adjustment. Titanium-reinforced carbide teeth with micrograin for longer sharpening intervals. Alternating Top Bevel (ATB) tooth design where the tooth angle alternates between left/right from 10° to 25°. Ideal for cutting hard or soft wood and general use in wood materials. Fine and angled surface. Highly suitable for use in laminate, hard wood, particle board, sandwich materials, plastic, plexiglass, and non-ferrous metals.
Includes:3 blades with 24/36/48 teeth, holes 30/20/16.

This industrial fan is designed for ventilation tasks in work environments such as construction sites, industrial facilities, workshops and other areas where targeted air circulation is required. The fan is equipped with a 61 cm rotor and aluminium blades that provide an airflow of 1463 L/s. The direct-drive motor reduces maintenance and supports stable operation during continuous use.
The fan has three speeds and a rotation speed of 1150 rpm, allowing the airflow to be adapted to the needs of the workspace. The sound level remains below 70 dB(A), making the unit suitable for areas where personnel are present for extended periods. The design includes a tiltable head with 360° movement for precise airflow direction.
The structure is built for mobility and features 12.5 cm wheels and a carrying handle that make it easier to move between workstations. A 3‑meter power cord provides flexibility in locations with varying access to power outlets. The fan operates on 220–240 V with a power consumption of 290 W. The total weight is 12.8 kg, providing stability during operation.
The product is suitable for professional users who require effective air movement for drying, ventilation or temperature control in the workplace.

Ceramic fiber disc with excellent performance. High aggressiveness throughout its entire lifespan thanks to the structure of the abrasive grain.

Storage cabinet made of painted steel sheet with transparent plastic drawers for easy content visibility. Each drawer has wide handles for smooth pulling and an edge that prevents it from falling out. Drawers can be labeled and divided using removable partitions. The cabinet is equipped with rubber feet to protect surfaces from scratches and ensure stability. A wall mounting feature is provided on the back. Up to twelve cabinets of the same height can be connected to create a space-saving system.