Concrete drill specially equipped for drilling holes in walls and ceiling beams of concrete, through which corrugated electrical pipes are to be passed. After drilling is completed, the corrugated outer pipe hose is applied to the drill so that the hose can easily be passed through the wall. The method also has the advantage of not running the risk of getting any rubbish in the hose at he bushing.

Panasonic Drill Driver 1DD1 is compact 18 V machine, only 16 cm long equipped with a brand new brushless motor which is 30% smaller than our previous one, hence we were able to make the machine as compact as it is. With the latest Dual Voltage technology, it can be run with both 14.4 & 18v batteries. Balanced ergonomic machine with incredible power. Electronic torque setting with impressive accuracy. Supplied with 2 x 3.0 Ah batteries and Tanos Systainer T-LOC.

All Ironside SDS + and SDS MAX, 2-cut and 4-cut Hammer drills are made with BC20 Luxembourg Ceratizit carbide blades. Hardness HRA90-91 .5 Automat soldered for highest precision.
2-cut SDS + hammer drill are PGM Certified.

3/8 in. square bracket. With internal hexagon. Chromium vanadium steel. Matte plated. Super Lock function that protects the bolt’s hexagon.

Impact bits with torsion zone and 1/4" hexagon mount. Black phosphate rad. Delivered in resealable "TicTac box".

Chromium vanadium steel. Chrome-plated. Thin-walled sockets with internal dodecatheon which twists 180º.

Blade made from chromium-vanadium steel. Ball in the long end of the wrench. Same dimensions at both ends. Ergonomic two-component handle with suspension hole.

Punch for sheet metal - only punch and pad a-collection. The punched out scrap is cut into pieces and thus cannot get caught in the pad. Used for sheet metal and plastic.
Pre-drill in accordance with the following:
• Bolt Ø9.5mm – drill 9.7–10.0mm
• Bolt Ø19mm – drill 19.5–20.0mm
Punches with 9.5 mm bolt are used in material with a maximum thickness of 2.0 mm.
Punches with 19.0 mm bolt are used in material with a maximum thickness of 3.0 mm.
Tightening bolts are ordered separately, E-no.: 1624975 & 1624976.

Draw bolt - hydraulic bolts for use with hydraulic tools, a-collection.

Adapter developed for corrugated electrical pipes, that are to be installed through walls and ceiling beams. Developed to quickly and easily move the corrugated electric pipe through the pre-drilled hole. The method also has the advantage of not running the risk of getting any rubbish in the hose at he bushing.

* Use the adapter with the drill in the drill before drilling starts.
* After drilling through the wall, remove the drill.
* Attach the corrugated outer pipe hose and inner pipe so that the hose can be easily passed through the wall.

Adapter developed for plumbing tap water system with pipe-in-pipe system, to be installed through walls and ceiling beams. Designed to quickly, easily and in a moment be able to bring both the corrugated outer pipe and the inner pipe of Pex/Alupex through the hole. The method also has the advantage of not running the risk of getting any rubbish in the hose at he bushing.

* Use the adapter with the drill in the drill before drilling starts.
* After drilling through the wall, remove the drill.
* Attach the corrugated outer pipe hose and inner pipe so that the hose can easily be passed through the wall/soffit.

Probe that is mounted on either the electric hose adapter or the pipe-in-pipe system for tap water, so that the hose and inner pipe can easily be passed through the wall/soffit in an already pre-drilled hole. The method also has the advantage of not running the risk of getting any rubbish in the hose at he bushing. The end of the probe has a 4 mm hole for the usual passing through of cables.

M-thread. Wingnut In accordance with DIN 315. Bright-galvanised steel.

Hole saws of bimetal for piercing PVC, PP and PE pipes and pipes in double-walled construction. Extra deep.

Multi-blade for cutting wood. Round.

Plaster screw with drill bit is used indoors to secure plaster boards to steel frames up to 2.0 mm.
Installation instructions: A screwdriver with an RPM of 2,000 - 3,000 is recommended.
Dimensions : approx. 15 pcs/m², screw spacing 20 cm on disc edge and 30 cm on inner part.

Padel Racket Viper Technical's core is built with Babolat's X-EVA Technology. Three different layers of EVA together provide a perfect effect. The two stiff outer layers give extra speed on hard hits, while a softer inner layer provides increased margin for error and comfort on softer hits. The 100% carbon hitting surface consists of 12K Carbon, adapted to the racket's shape to deliver explosiveness and a controlled touch. The grooved surface combined with a sandpaper-like finish, 3D Spin+, provides a good grip. With the new Vibrasorb System, each hit gains increased comfort. This vibration-damping system is integrated into the racket's neck above the handle and reduces the vibrations that occur with each hit. The result is increased comfort and a reduced risk of injuries such as tennis elbow. Like previous models from Babolat, the Viper Technical is designed with HPS-Technology. The Hole Pattern System provides more speed and control thanks to the drilled holes in the racket being adapted to the racket's shape and sweet spot. This gives more effect in the hits for more speed and more grip on the ball for increased spin.

Specification:

Core: 38 mm.
Frame: Carbon.
Hitting surface: Carbon. 12K
Shape: Diamond
Balance: Head-heavy (270mm).
Weight: 365 grams.

Connect two inverter generators of the same type with the parallel connection kit and double the power output. Two identical Ironside generators must be used. Ideal when using products that require a lot of power. Equipped with 1 Schuko 230V 16A and 1 CEE 32A 230V outlet. For item no. 539545 and item no. 35655123.

Safety bits. Insulated and VDE-approved according to DIN EN IEC 60900:2018, ISO 8764 handle for work under voltage up to 100V. Length 125 mm. Color coding for model and size. An insulated handle is available as an accessory under item number 70923093.