Outlet Electrical

Permanent LED Downlight for indoor use with high light output and good color reproduction. Primarily intended for installation in subceilings, can be installed in existing holes with a diameter of 80 to 95 mm. Solid cast fixture housing in aluminum with integrated actuator allows quick and easy installation. Frosted dimmer glass and polished reflector. Dimmable with 13 706 02, for example.

Area of use:
Decoratively designed luminaire for general lighting in offices and similar environments with system ceilings.
Performance:
Recessed LED luminaire for ceilings. Comes with drive. Frame of white lacquered sheet steel with opal light openings.
Supplied with drive device for control on / off or dimmable device with corridor function for control with Dali or impulse switch.
IP class 44 from below.
Mounting:
Fits in the suspended ceiling's T-profile.
Connection:
Power luminaires are connected with a pre-assembled 2.2 m cable stand, Dali luminaires are delivered with a pre-assembled 2.5 meter 5-conductor.
When controlling with an impulse switch, a maximum of 30 luminaires can be connected per pushbutton.

Applications:
Downlight with very good color reproduction which is excellent for general lighting.
Design:
Supplied with dimmable actuator and extra reflector for desired spreading angle.
aLED 8 comes with three reflectors (24 °, 36 ° and 64 °).
aLED 11 comes with two reflectors (24 ° and 36 °).
Mounting
Recessed ceiling, plaster, panel or similar. Installed with safety box.
aLED 8 Hole cutting 73 mm and recess depth 35 mm.
aLED 11 Hole cutting 79 mm and recess depth 67 mm.
Connection
Dimmable driver connected to 230V with quick-connect terminal and strain relief for cable or flex pipe. Double connections per conductor.
AmbiDim 2200-3000K

SELENE MINI has a timeless design that fits into most different environments. A fine luminaire energy-efficient luminaire that provides a well-dimmed light. SELENE MINI is available with both symmetrical and asymmetrical light image and can therefore be used for different environments and projects. The luminaire can be switched in 6 different effects 15,18,21,24,27 and 30W

Bullet with 2 megapxel lens IP65

Unprotected screw connection for wire

A-collection openable connector clamps are compact and ergonomically-designed. The clamps are available for two, three, and five wires. Solid wires, 0.5-2.5 mm2 and stranded wire (FK) 1.5-2.5mm2 can be combined in the same clamp. The transparent casing with test holes makes it easy to verify that the wires are in their place and ready to test the installation. Wires (EK and FK) can be connected without opening the terminal. The wires are insulated, 9-10mm

The MIF-66 for exit is one of the market's smallest non-contact readers, which makes it both discreet and easy to place. It can be mounted on the door frame or directly on the door. This model can withstand hard blows such as blows, kicks and fire with an open flame. MIF-66 is made of macrolone which is a very impact-resistant material. The MIF-66 is connected to DB or DIO in the R-CARD 5000 system and has a five-meter finished cable. It also serves as an initiation reader for NoKey offline.

Cable splice for round plastic insulated 3-conductor cable. Hybrid joint consisting of cold shrink body spread on spiral with integrated field control (geometric) and insulation for each conductor and outer hose of thick-walled heat shrink tubing for mechanical protection and moisture sealing. The joint is adapted to the supplied screw joint sleeves with break skull. Screw joint sleeve for screen included.