A-collection ball valves are approved for subcritical CO2 and made of a strong brass body with copper connectors and brass seal cap. All internal parts are designed to guarantee zero leakage in or out from the valve. The valve is not flow direction dependent. Leak tested with helium at its calculation pressure.
UL and CE approved.

Adjustable brackets for a-collection ducts

Outer knee, a-collection

Straight duct, a-collection

Standard wall model for general air conditioning applications.
4-way air exhaust
four fan speeds and automatic settings
Special high-efficiency plates
Horizontal air foil
Infrared (IR) remote control with real time timer
Automatic restart after power failure
Built-in water condensation pump (maximum lifting height 1 m from the bottom edge of the cassette
Condensation water ø 32 mm
ErP approved.
Refrigerant R410A.
220-240V / 1-phase / 50Hz
Energy class Cold A.

Work area cold -15°C ~ +48°C.
Cooling effect based on indoor temperature +27°C, outdoor temperature +35°C.

Delivered without the front panel, select a panel as follows:
ICKU12-18NI2 panel 7128060
ICKU24-42NI1 panel 7128062

400V 3-phase 50Hz.
Tecumseh’s third generation outdoor, air-cooled Silensys condensing units have improved in a number of ways, including the addition of a better sound proof case.
The condensing unit contains a compressor, condenser, Coolant holder with view glass and a fusible plug, double pressure switches, speed regulated condenser fan and complete set-up equipment. SILAJ and SILFH are supplied with brackets for floor or wall mounting. SILAG models have two fans and
brackets for floor installation.
All of the cooling effect is specified in KW for R134a at ambient temperature +32°C, superheat 10K and supercooling 3K, in accordance with EN13215.

Cooling output in kW with a condensation temperature of +40°C, 1K in supercooling and 8-10K superheat
Evaporation temperature:
R134a -10°C
R404A -35°C (N)
R407C +5°C

Filter for solder adapter included.

For Alco valves TCLE, TJRE, TERE, TIRE and THRE

Flare x Solder (3/8"x1/2") Max operating pressure 28 bar Max test pressure 36 bar.
Capillary tubes and bulb in stainless steel.
One turn of the static overheating protector corresponds to approx. 4°C change of the total overheating protection.

ACB cartridge pressostats are pressure monitors with a small membrane to be used in cooling- and air- conditioning systems. ACB are equipped as a standard with a 6A contact system with automatic or manual reset. ACB is sturdy and safe to use and its small size and low weight means that it can be installed directly into cooling systems in which pressure needs to be monitored. ACB is available in many different versions with different pressure settings and pressure connections.
Solid difference. Cable 1.5 m. IP65

0

Armaturenwerk Altenburg GMBH

Armaturenwerk Altenburg GMBH

Armaturenwerk Altenburg GMBH

Max operating pressure 46
Corrosion-resistant epoxy paint
high adsorption capacity for water and acid
High filtering capacity
All ratings are given in kW and as perARI710-86 at a vaourisation temp. o -15°C, cond.temp. +30°C
and Δp=0.07 bar.

Capacity (min - max)R134a -10°C and R404A -40°C
PS 20.7 bar (-10°C to +65°C)
PS 15.5 bar (-45°C to -10°C)

Max operating pressure 120 bar. Working range -45°C to +130°C

Maximum operating pressure 120 bar. Working range -45 ° C to + 130 ° C

Maximum operating pressure 120 bar. Working range -45 ° C to + 130 ° C

90° angle E1. External flare x external NPT

Shrader valves with puncture function for soldering on copper pipes.

0

0

0

Temperature display for regulators in the EKC, AK-CC and AK-PC series.

0

0

0

0

0

0

Flare x Flare (3/8" "x1 / 2" ") Maximum test pressure 32 bar. A revolution's adjustment of the static overheating corresponds to about 4 ° C change of the total overheating. No MOP

Accessories for EX and CX valves

Fits the Klauke MAP2L19, Novopress ACO102 and ACO103 presses

0

Fits expander tools BLACK MAX BTLH5E and BTLE9

EBVT-PR ball valves with built-in pressure equalization is a smart news from Parker. These valves allow positive shut-off in one direction and flow in the other direction in the event of a pressure difference in the refrigerant circuit and thus protect the refrigeration system against excessive pressures during service. No parallel-connected non-return valve with associated piping needs to be installed as the non-return valve is already integrated in the ball valve, which reduces material costs. Compact design simplifies installation. Less soldering results in increased productivity and lower labor costs, and the risk of leakage is also reduced as a result. Solder connections in K65. Starts pressure equalization at pressure difference 0.345 bar and is fully open at 3.45 bar.

Flare x Solder (3/8" x1 / 2 ") Maximum test pressure 32 bar. One lap adjustment of the static overheating corresponds to about 4 ° C change of the total overheating. No MOP

Compact angled evaporator from Güntner with a wide capacity range max. operating pressure up to 80 bar 2-speed AC fans as standard Optimized dimensions for transport and storage Easy to install Side plates and drip tray with hinges Ceiling mounting bracket with slotted hole Schrader valve on the outlet Easy access to all components HACCP Certified by TÜV Nominal effects (SC2) are given at room temperature + -0 ° C, Δt8K and for R744 (CO2)

Accessories to EX and CX valves