Order lines: 0

Ahlsell Products Heating and Sanitation Bath, shower, toilet and furnishings Sanitary fittingsBondable mounting washers

Bondable mounting washers

Are you looking for a sanitary fixture for your bathroom project? Ahlsell offers everything from mixers to water ejectors in its carefully selected range of sanitary fixtures. We value reliable, long-lasting products. With us, you will only find high-quality bathroom furniture and fittings. Both private homes and commercial properties can benefit from our sanitary fixtures. We will be happy to help you find the right option for your particular project. Together, we make sure you have the right products to create top-class bathrooms. Explore our entire range of sanitary fittings here on the website or visit your nearest Ahlsell store.

Products (28)

Adhesive Plate Double, Design4Bath

Adhesive Plate Double, Design4Bath

Art. no.: 8740116

This adhesive plate is intended for drill-free installation of pipe clamps (double) suitable for a number of brands such as Falu Snap, Purus Flexi etc.

Adhesive Plate Single, Design4Bath

Adhesive Plate Single, Design4Bath

Art. no.: 8740115

This glue board is intended for no-drill installation of pipe clamps (simple) and is suitable for a number of makes such as FALU Snap, PURUS Flexi, etc.

Mounting plate, Design4Bath

Mounting plate, Design4Bath

Art. no.: 8740108

Mounting plates for no-drill installation of shower bases and walls. One set per profile (3 plates per set). Complete with nut and washer.

Round mounting plate with thread, Design4Bath

Round mounting plate with thread, Design4Bath

Art. no.: 8740104

Mounting plate with thread; nut and washer included. For installation of simpler products. For example, these plates can be used with shower kits, which often have a hollow plastic base with no glue-able surface. The solution is to find a mounting plate that can be concealed behind the attachment and that is placed in an existing screw hole. Then the mounting plate can be attached with Glabete adhesive; just allow it to harden, and then secure the shower kit with the included nut and washer.

Mounting plate Design4Bath for FMM/Mora mixer bracket

Mounting plate Design4Bath for FMM/Mora mixer bracket

Art. no.: 8740110

Mounting plate for FMM mixer bracket Vaska 160/40CC (RSK 8187477) and Mora mixer bracket (RSK 818 87 00), stainless steel with screws. For no-drill installation. Mixer fitting not included.

Mounting plate Design4Bath for mixer bracket 150,160 cc, fixed dimension

Mounting plate Design4Bath for mixer bracket 150,160 cc, fixed dimension

Art. no.: 8740129

Mounting plate for thin mixer brackets, 160 cc, with screws. With fixed centre distance. For no-drill installation. Mixer fitting not included.

Rectangular mounting plate with thread, Design4Bath

Rectangular mounting plate with thread, Design4Bath

Art. no.: 8740105

Mounting plate 40x20 with thread M4x15mm, including nut and washer.

Round mounting plate for shower set, Design4Bath

Round mounting plate for shower set, Design4Bath

Art. no.: 8740119

Mounting plate for shower kit. Supplied with 2 stainless cap-screws, 2 nuts, and washers for alternative types of attachment. To be combined with Glabete adhesive products. Pre-treat the plates, clean the surfaces to be glued, apply adhesive, and attach. Follow the instructions in the adhesive packages. With Glabete’s mounting plate accessories, you can easily create glue-able surfaces on non-glue-able products. Since many products have not yet been adapted to today’s modern installation methods, Glabete’s mounting plates provide a way to convert them.

Mounting plate Design4Bath for Oras mixer bracket

Mounting plate Design4Bath for Oras mixer bracket

Art. no.: 8740109

Mounting plate and screws for no-drill installation, fits to Ora’s mixer brackets 150/40cc (RSK 8187216). Mixer fitting not included.

Adhesive Washer for Glue Mounting of FMM Mixer 9000E 40c/c, Design4Bath

Adhesive Washer for Glue Mounting of FMM Mixer 9000E 40c/c, Design4Bath

Art. no.: 8740132

Mounting plate with screws for adhesive installation of FMM’s 40 c/c mixer 9000E (fits to RSK8343314, 8343318, 8343317, 8343321 ). Installation: First apply Glabete adhesive to the plate on the wall, then screw the mixer’s attachment to the glued plate.

Adhesive Washer for Tap Valve Mounting, Design4Bath

Adhesive Washer for Tap Valve Mounting, Design4Bath

Art. no.: 8740134

Adhesive plate Tap/Valve bracket, including screws. Installation: First apply Glabete adhesive to the plate on the wall, then screw the mixer’s attachment to the glued plate with the attached screws.

Adhesive Washer Smart Universal, Design4Bath

Adhesive Washer Smart Universal, Design4Bath

Art. no.: 8740136

Adhesive disk for drill-free mounting of all sorts of products like wire baskets, shower setts etc. With SMART adhesive disk universal, you create the possibility to hang up products that lack a surface for glue mounting. Chrome-plated finish, with deco-set, screws & nuts.

Smart mix adhesive kit including cleaning set, Design4Bath

Smart mix adhesive kit including cleaning set, Design4Bath

Art. no.: 4095502

Glue kit incl. cleaning set, i.POWER XS, Design4Bath

Glue kit incl. cleaning set, i.POWER XS, Design4Bath

Art. no.: 4095014

i.POWER XS is an adhesive kit with high, direct mounting strength.
1K adhesive based on hybrid polymer STPU.
Very good adhesion to most substrates without the use of primer, even when exposed to water. Very high mechanical strength and elastic. For stress-compensating bonding and dynamic stresses. Neutral, odorless and fast-curing. Free from isocyanates, silicone-free, good UV resistance and good aging properties. For use both outdoors and indoors.
Certified EMICODE® EC 1 Plus.
Contains cleaning kit for optimal bonding of, among other things, bathroom products such as bathroom accessories, shower sets. Perfect for also using for other products that need to be mounted without drilling and where the priority is to obtain a fast and direct adhesion and a strong assembly.
i.POWER XS also cures under water.

Tip! When gluing between two diffusion-tight surfaces, e.g. metal to tile, the adhesive must be moistened slightly in order to be able to cure thoroughly. Use the spray which comes with our CLEANING.KIT for the purpose. Don't forget to always clean thoroughly for best results.

Adhesive i.POWER, Design4Bath

Adhesive i.POWER, Design4Bath

Art. no.: 4095496

Adhesive i.UNIVERSAL, Design4Bath

Adhesive i.UNIVERSAL, Design4Bath

Art. no.: 4095497

Adhesive i.CRYSTAL, Design4Bath

Adhesive i.CRYSTAL, Design4Bath

Art. no.: 4095500

Cleaning kit for bonding, CLEANING.KIT, Design4Bath

Cleaning kit for bonding, CLEANING.KIT, Design4Bath

Art. no.: 4046944

Mounting plate Drill-free M4 incl. nut and washer, Design4Bath

Mounting plate Drill-free M4 incl. nut and washer, Design4Bath

Art. no.: 4436143

Adhesive washers for drilling-free assembly of shower set a-collection Lux III RSK 8187845.

Mounting plate Drill-free M4 incl. nut and washer, Design4Bath

Mounting plate Drill-free M4, Design4Bath

Mounting plate Drill-free M4, Design4Bath

Art. no.: 4436144

Adhesive, i.UNIVERSAL+, Design4Bath

Adhesive, i.UNIVERSAL+, Design4Bath

Art. no.: 4095498

Adhesive, i.CRYSTAL +, Design4Bath

Adhesive, i.CRYSTAL +, Design4Bath

Art. no.: 4095501

Universal mini adhesive kit including cleaning set, Design4Bath

Universal mini adhesive kit including cleaning set, Design4Bath

Art. no.: 4095524

Adhesive Washer for Shower Wall Imber I, a-collection

Adhesive Washer for Shower Wall Imber I, a-collection

Art. no.: 7403544

Adhesive Washer Flexi, Design4Bath

Adhesive Washer Flexi, Design4Bath

Art. no.: 4436381

This washer is intended for drill-free installation by gluing wall / cover washers to Vatette V6 systems, FMM / Mora and Trio Perfekta (not DesignLine) products. Delivered in 2-pack with screws adapted to the intended product. Recommended adhesive product: i.UNIVERSAL. For more info see: www.design4bath.se

Adhesive Washer Flexi, Design4Bath

Adhesive washer, for Faucet/Valve attachment, Design4Bath

Adhesive washer, for Faucet/Valve attachment, Design4Bath

Art. no.: 8008000

Adhesive washer for drill-free assembly of Faucet/Valve mount. Stainless steel incl. screws. CC dimensions hole image: 40mm. Recommended adhesive product: i.Universal

Adhesive tray for shower mixer, Design4Bath

Adhesive tray for shower mixer, Design4Bath

Art. no.: 8008010

Adhesive washer for TRIO and A-Collection mixer bracket 150 or 160/40CC, stainless steel with nuts (Trio) and screws (A-Collection) to Vatette. For drill-free assembly by gluing. Recommended adhesive product i.UNIVERSAL. see: www.design4bath.se for more info

Adhesive tray for shower mixer, Design4Bath

Adhesive tray for shower mixer, Design4Bath

Glue washers shower curtain rod, Design4Bath

Glue washers shower curtain rod, Design4Bath

Art. no.: 8008008

Glue washers for shower curtain rod.
Recommended adhesive product: i.Universal

Glue washers shower curtain rod, Design4Bath

Showing 28 of 28