Order lines: 0

Ahlsell Products Heating and Sanitation Valves and measuring devices InstrumentFlow

Flow

Heat quantity meter

Behöver du instrument?
Vi på Ahlsell hjälper dig att hitta rätt produkt för just din applikation.
Oavsett om du arbetar med industriapplikationer eller VS-installationer har vi rätt produkt för just detta.
Vi erbjuder ett brett sortiment av produkter här på webben, men om det skulle vara så att du inte hittar det du söker
har vi både kompetenta säljare samt ett globalt leverantörsnät för att hjälpa dig att hitta rätt produkt.

Impeller meter S110 EF 90°C, prepared for M-bus/pulse module, a-collection

Impeller meter S110 EF 90°C, prepared for M-bus/pulse module, a-collection

Art. no.: 5143677

Sitrans FM MAG5000/5100W complete flow meter EPDM, Siemens

Sitrans FM MAG5000/5100W complete flow meter EPDM, Siemens

Art. no.: 5182160

SITRANS FM flow meter consisting of measuring tube MAG5100W EN 1092-1 flange in carbon steel ASTM A105. Liner material: EPDM. Electrode material: Hastelloy C-276. Transmitter MAG5000 IP67 compact in polyamide with display 115-230V AC 50/60 Hz and 2 pcs M20 cable glands. Media temperature -10...+70ºC. Measurement accuracy 0.4% +/- 1mm/s.

Sitrans FM MAG5000/5100W complete flow meter EPDM, Siemens

Sitrans FM MAG5000/5100W complete flow meter EPDM, Siemens

Sitrans FM MAG5000/5100W complete flow meter EPDM, Siemens

Sitrans FM MAG5000/5100W complete flow meter EPDM, Siemens

Sitrans FM MAG5000/5100W complete flow meter EPDM, Siemens

Cold water meter DomoJet, Xylem

Cold water meter DomoJet, Xylem

Art. no.: 5144025

Sensus single-jet impeller for cold water DomoJet. Connection G3 / 4" (G20) external thread. Ratio (R) = 80. Meter housing in brass. Including inlet strainer and gaskets. Prepared for Sensus remote reading with pulse, wired M-Bus or wireless wM-Bus (purchased separately).

Impeller meter M100 wet-running multi-jet, a-collection

Impeller meter M100 wet-running multi-jet, a-collection

Art. no.: 5191599

With numeric dial. Only approved meters may be used for measuring domestic water consumption. The meter is protected from impurities by a pipe strainer in the inlet. The strainer can be replaced without breaking the seal. Supplied with first-time-use verification in accordance with the National Board of Housing, Building and Planning requirements. Type MNR-Artist without sensor. EEG-approved, class B.

Impeller meter M100 wet-running multi-jet, a-collection

Water meter bracket for copper or PEH connection, a-collection

Water meter bracket for copper or PEH connection, a-collection

Art. no.: 5207913

Water meter bracket a-collection of galvanised steel with valves and couplings of dezincification-resistant brass. Gauge pierce and controllable check valve in accordance with EN-1717. Supplied complete with screws and plugs. The bracket is supplied with connection for copper or PEH connection and a separate check valve.

Water meter bracket for copper or PEH connection, a-collection

Hot water meter DomoJet, Xylem

Hot water meter DomoJet, Xylem

Art. no.: 5182456

Sensus single-jet flywheel gauge for hot water DomoJet. Connection external thread. Meter housing in brass. Including inlet strainer and gaskets. Prepared for Sensus remote reading with pulse, wired M-Bus or wireless wM-Bus (purchased separately).

Water meter brackets parallel-connected, Beulco

Water meter brackets parallel-connected, Beulco

Art. no.: 5208072

Water meter brackets parallel-connected, Beulco

Water meter brackets parallel-connected with controllable check valve, Beulco

Water meter brackets parallel-connected with controllable check valve, Beulco

Art. no.: 5208048V

Water meter brackets parallel-connected with controllable check valve, Beulco

Water meter brackets parallel-connected with controllable check valve, Beulco

Cold Water Meter 420 Horizontal, Xylem

Cold Water Meter 420 Horizontal, Xylem

Art. no.: 5143685

Impeller meter S110 EP 90°C with pulse sensor 1p/10L, a-collection

Impeller meter S110 EP 90°C with pulse sensor 1p/10L, a-collection

Art. no.: 5185065

With numeric dial, dry running apartment meter. For mounting in all positions. Measuring range and inaccuracy is stated for horizontal mounting. With externally threaded connections. EEG-approved in accordance with class B for horizontal mounting, in accordance with class A for vertical mounting

Transmitter MAG5000 IP67

Transmitter MAG5000 IP67

Art. no.: 5182176

M-bus/Pulse Module TMP-F IP56 1-1000L/Pulse, M-bus EN13757, a-collection

M-bus/Pulse Module TMP-F IP56 1-1000L/Pulse, M-bus EN13757, a-collection

Art. no.: 4647819

Transmitter MAG6000 IP67

Transmitter MAG6000 IP67

Art. no.: 5182180

Remote reading for Domo-M M-Bus Module, Xylem

Remote reading for Domo-M M-Bus Module, Xylem

Art. no.: 4648140

Cold water meter DomoJet with M-Bus, Xylem

Cold water meter DomoJet with M-Bus, Xylem

Art. no.: 5144037

Sensus single-jet impeller for cold water DomoJet Construction length Connection external thread. Ratio (R) = 80. Meter housing in brass. Including inlet strainer and gaskets. Mounted Sensus remote reading with wired M-Bus.

Flowmeter MAG5100W carbon steel EPDM, Siemens

Flowmeter MAG5100W carbon steel EPDM, Siemens

Art. no.: 5182203

SITRANS FM measuring tube MAG5100W EN 1092-1 flange in carbon steel ASTM A105. Liner material: EPDM. Electrode material: Hastelloy C-276. Media temperature -10...+70ºC.

Flowmeter MAG5100W carbon steel EPDM, Siemens

Flowmeter MAG5100W carbon steel EPDM, Siemens

Flowmeter MAG5100W carbon steel EPDM, Siemens

Flowmeter MAG5100W carbon steel EPDM, Siemens

Flowmeter MAG5100W carbon steel EPDM, Siemens

Hot water meter DomoJet with M-Bus, Xylem

Hot water meter DomoJet with M-Bus, Xylem

Art. no.: 5182465

Sensus single-jet flywheel gauge for hot water DomoJet. Connection external thread. Meter housing in brass. Including inlet strainer and gaskets. Mounted Sensus remote reading with wired M-Bus.

Check valve for multi-jet turbine meters, a-collection

Check valve for multi-jet turbine meters, a-collection

Art. no.: 19058827

The check valve is fitted in the outlet of the vane meter. Available for Qn 2.5, 6 and 10. The check valve does not affect the measuring results.

Impeller meter S110 EF 30°C, prepared for M-bus/pulse module, a-collection

Impeller meter S110 EF 30°C, prepared for M-bus/pulse module, a-collection

Art. no.: 5143676

Cable set Siemens MAG meters

Cable set Siemens MAG meters

Art. no.: 5182172

Non-return valve controllable lead-free, a-collection

Non-return valve controllable lead-free, a-collection

Art. no.: 5159001

Non-return valve in lead-free brass with max 0.10% lead content, controllable EN1717, used as backflow protection Type EA.

Water meter bracket lead-free 110mm - G15/G20, a-collection

Water meter bracket lead-free 110mm - G15/G20, a-collection

Art. no.: 5142005

Bracket for 1 or 2 water meters with construction length 110mm Q3-2.5, with adapter in PP plastic for temporary use during construction. The console in stainless steel with lead-free brass, low 25mm or high 50mm model with wall distance.

Water meter bracket lead-free 110mm - G15/G20, a-collection

Water meter bracket lead-free 110mm - G15/G20, a-collection

Water meter bracket lead-free 110mm - G15/G20, a-collection

Impeller meter M190 90°C dry-running multi-jet, a-collection

Impeller meter M190 90°C dry-running multi-jet, a-collection

Art. no.: 5183421

Max temperature 120°C. DN 15-40 ext. thread connections, DN 50 with flanges SS PN16. EEG-approved for max +90°C.
Dry running. Max operating pressure 1.6 MPa.

Impeller meter M190 90°C dry-running multi-jet, a-collection

Short Coupling for Water Meter

Short Coupling for Water Meter

Art. no.: 1981232

Incl. gasket of EPDM rubber.

Coupling, long made of metal for water meters

Coupling, long made of metal for water meters

Art. no.: 1981422

Incl. gasket of EPDM rubber.

Extension coupling of metal for water meters

Extension coupling of metal for water meters

Art. no.: 5208087

Extension piece for water meter 190 mm which is to be extended to 220 mm
L=30mm

Gaskets for water meter connection EPDM

Gaskets for water meter connection EPDM

Art. no.: 1989280

For cold water and hot water meters EPDM.

Gaskets for water meter connection EPDM

Gaskets for water meter connection EPDM

Leather Gaskets for Water Meter Connections, a-collection

Leather Gaskets for Water Meter Connections, a-collection

Art. no.: 7290108

For cold water meters

PVC Fitting with Filter, Water Meter

PVC Fitting with Filter, Water Meter

Art. no.: 5208129

For meter size Qn m³/h: 2,5

Mounting Bracket Beulco with Adjustable Legs

Mounting Bracket Beulco with Adjustable Legs

Art. no.: 5207972

Galvanised strap and mounted water meter couplings wit O-ring seals.

Mounting Bracket Beulco with Adjustable Legs

Mounting Bracket Beulco for Water Meter

Mounting Bracket Beulco for Water Meter

Art. no.: 5208020

Stainless water meter bracket. One permanent coupling and one with adjustable sleeve. Sealing hole in nut and strap.

Mounting Bracket Beulco for Water Meter

Mounting Bracket Beulco for Water Meter

Brass Fitting

Art. no.: 5208093

For water meter.

Apartment Metering Console Single

Apartment Metering Console Single

Art. no.: 5208140V

Water meter console for 1 meters 110 mm, with non-return valve.
Zinc-resistant brass in water-affected parts. Brass nuts

Apartment Metering Console Single

Water meter coupling Beulco

Water meter coupling Beulco

Art. no.: 5207907

With gauge valve and ball valves.

Water meter coupling Beulco

Water meter coupling Beulco

Water meter coupling Beulco

Mounting Bracket EZZE for Water Meter

Mounting Bracket EZZE for Water Meter

Art. no.: 5208145

With an outward hinge and mounted coupling, as well as movable collar

Mounting Bracket EZZE for Water Meter

Impeller meter M100i wet-running multi-jet, prepared for pulse-M-bus

Impeller meter M100i wet-running multi-jet, prepared for pulse-M-bus

Art. no.: 5143669

Impeller meter M100i wet-running multi-jet, prepared for pulse-M-bus

Impeller meter M100i wet-running multi-jet, prepared for pulse-M-bus

Impeller meter M100i wet-running multi-jet, prepared for pulse-M-bus

Impeller meter M100i wet-running multi-jet, prepared for pulse-M-bus

M-bus Pulse Module Falcon MJ for M100i Turbine Meter, a-collection

M-bus Pulse Module Falcon MJ for M100i Turbine Meter, a-collection

Art. no.: 4647816

Ball Valve for Energy Meter M10x1 PN40, a-collection

Ball Valve for Energy Meter M10x1 PN40, a-collection

Art. no.: 5493662

Flowmeter MAG5100W carbon steel NBR, Siemens

Flowmeter MAG5100W carbon steel NBR, Siemens

Art. no.: 5182186

SITRANS FM measuring tube MAG5100W EN 1092-1 flange in carbon steel ASTM A105. Liner material: NBR hard rubber. Electrode material: Hastelloy C-276. Media temperature -10...+70ºC.

Flowmeter MAG5100W carbon steel NBR, Siemens

Flowmeter MAG5100W carbon steel NBR, Siemens

Flowmeter MAG5100W carbon steel NBR, Siemens

Sitrans FM MAG5000/5100W complete flow meter NBR, Siemens

Sitrans FM MAG5000/5100W complete flow meter NBR, Siemens

Art. no.: 5182144

SITRANS FM flow meter consisting of measuring tube MAG5100W EN 1092-1 flange in carbon steel ASTM A105. Liner material: NBR hard rubber. Electrode material: Hastelloy C-276. Transmitter MAG5000 IP67 compact in polyamide with display 115-230V AC 50/60 Hz and 2 pcs M20 cable glands. Media temperature -10...+70ºC. Measurement accuracy 0.4% +/- 1mm/s.

Sitrans FM MAG5000/5100W complete flow meter NBR, Siemens

Sitrans FM MAG5000/5100W complete flow meter NBR, Siemens

Sitrans FM MAG5000/5100W complete flow meter NBR, Siemens

Sitrans FM MAG5000/5100W complete flow meter NBR, Siemens

Sitrans FM MAG5000/5100W complete flow meter NBR, Siemens

Wall bracket for transmitter

Wall bracket for transmitter

Art. no.: 5182177

Water meter bracket, LK

Water meter bracket, LK

Art. no.: 4648113

Water meter bracket, LK

Water meter bracket 190-220mm with check valve, Vatette

Water meter bracket 190-220mm with check valve, Vatette

Art. no.: 4647872

Water meter bracket 190-220mm with check valve, Vatette

Cold Water Meter 420 Vertical, Xylem

Cold Water Meter 420 Vertical, Xylem

Art. no.: 5143687

Remote reading HRI-B, Xylem

Remote reading HRI-B, Xylem

Art. no.: 4647854

Water meter coupling 190-220 mm, lead-free, a-collection

Water meter coupling 190-220 mm, lead-free, a-collection

Art. no.: 4647956

Water meter console, complete kit in lead-free brass with connection pipe, angular ball valves and controllable
check valve according to EN1717, 1 pcs angle ball valve G20x22mm, 1 pcs angle ball valve G20XG25, connection pipe in pp plastic. Screws and plugs. Stainless steel bracket. Used for water meters Q3-4 m3 / h (previously
Qn 2,5)

Water meter coupling 190-220 mm, lead-free, a-collection

Lead-free water meter bracket 190-220mm - G20/G20, a-collection

Lead-free water meter bracket 190-220mm - G20/G20, a-collection

Art. no.: 4647974

Lead-free water meter bracket 190-220mm - G20/G20, a-collection

Water meter bracket A500-1STB, Beulco

Water meter bracket A500-1STB, Beulco

Art. no.: 5208019V

Water meter bracket A500-1STB for cold water meter 190-220 mm Q3 4 connections G25.
The bracket has an adjustable wall distance and external thread G20.

Fitting 110mm, LK

Fitting 110mm, LK

Art. no.: 1882666

LK distance pipe 110 is used as a distance for later connection of water meters alt. heat flow meter in LK Manifold Cabinet UNI. Comes with 2 fiber gaskets. LK distance pipe 110 works with LK CubicMeter, the meter can easily be placed on the pass bit. The fitting piece is manufactured in PPSU.

Energy meter PolluStat2, Xylem

Energy meter PolluStat2, Xylem

Art. no.: 4956826

Sensus complete heat meter PolluStat2. Ultrasonic meter. Connection external thread. Inside diameter of the meter. Temp sensor 45 / 5.2, 1.5m cable. Battery powered. Communication cards are ordered separately (M-Bus, wireless wM-Bus, pulse output).

Communication card for PolluStat2 M-Bus, Xylem

Communication card for PolluStat2 M-Bus, Xylem

Art. no.: 4956850

Water meter bracket PVK, LK

Water meter bracket PVK, LK

Art. no.: 4648102

LK Parallel-connected Water Meter Console (LK PVK) for water meter Q3 4 with construction length 190-220 mm connection G25. LK PVK is available in many different models with variants for only 190 mm meters and 190-200 mm meters. By closing the valve before and after a water meter, this can be dismantled at the same time as the water flow is running through the other meters. LK PVK is always delivered with a built-in non-return valve in the valve after the meter. This non-return valve is also controllable and can also be replaced should it break. At LK PVK, it is also possible to choose whether you want incoming from above or below, the same applies to the meters. LK Passbit 190mm which is delivered with all LK PVK is intended to be able to sit permanently on cold water, but only temporarily on hot water. The benefits and brackets for the water meters are made of stainless steel.

Water meter bracket PVK, LK

Water meter bracket PVK, LK

Showing 52 of 67